Tomasz Orłowski schrieb:
>> So it definitely must be network issue not
>> firmware.
>>
>>
> ehhh I was too hurry with optimism. Same again. I don't know what's
> going on.
> After 10 successful boots and connections, I can't connect again. Maybe
> I got something wrong with vlans. It doesn't look right.
> I've thought I should have non-configured eth0 up because Asus got one
> real interface + 2 configured vlans. One for LAN ports and one for WAN.
>
> Guys could you please send me output of "ipconfig", "robocfg show" and
> "cat /proc/net/vlan/*" from your working w500gP ?
By default, all LAN ports are enabled.
ipconfig sounds like a Windows command - did you mean ifconfig?
eth0 Link encap:Ethernet HWaddr 00:0E:A6:F1:ED:3C
inet addr:192.168.10.1 Bcast:192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1
RX packets:139109360 errors:0 dropped:0 overruns:0 frame:0
TX packets:139229364 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:2846138040 (2.6 GiB) TX bytes:3619502705 (3.3 GiB)
Interrupt:4
# robocfg show
Switch: enabled
Port 0(W): DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 1(4): DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 2(3): DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 3(2): DOWN enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 4(1): 100FD enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
Port 5(C): 100FD enabled stp: none vlan: 0 mac: 00:00:00:00:00:00
VLANs: BCM5325/535x enabled mac_check mac_hash
vlan0: 0 1 2 3 4 5u
No vlans here:
# cat /proc/net/vlan/*
VLAN Dev name | VLAN ID
Name-Type: VLAN_NAME_TYPE_RAW_PLUS_VID_NO_PAD
--
Tomasz Chmielewski
http://wpkg.org
|
|