Russel napisał(a): > > > According to robocfg, Port 1 is linking at only 10 mbps half duplex. I > looked at your previous posts, but didn't see the speed of your other > network switch/hub. (Your Asus is connected to another switch, right?) > My bet is that you have a bad cable between your other switch and the > Asus. If your other hub/switch is only 10mbps, then the link speed > should be 10mbps only (and maybe just half duplex), but if it is > 100mbps, then this should definitely be 100mbps. > Thanks Russel. This 10mitb halfduplex link is ok. As I said earlier, I've found old hub and replaced my switch to be sure that everything on network side is correct. I don't use homemade cables so I'm sure they got correct pair order. I don't have luck, you have vlans disabled too. Tomasz |