Refering to my previous mail....... I've found only one old post with problems similar to mine, and I see that you Tomasz posted something in this thread too. Please take a look what "astudent" wrote here --> http://wl500g.info/showthread.php?t=6339&highlight=segmentation He suggested problems with memory. I don't know how to obtain values showed by nvram in Debian, so I quickly flashed my 500gP with old Whiterussian, and did this: root at OpenWrt:/# nvram show|grep -i ram os_ram_addr=80001000 sdram_config=0x0062 sdram_refresh=0x0000 sdram_ncdl=0x10309 wl_frameburst=0 sdram_init=0x0009 dl_ram_addr=a0001000 size: 8752 bytes (24016 left) I've found also here: http://wl500g.info/showthread.php?t=10183&highlight=nvram ..that original values for WL-500gP should be like those: sdram_init=0x000b sdram_ncdl=0x207 I'm curious what are your settings. I'm a little bit scared to set it, smells like fantastic chance of bricking the box ;o) but I think I'll riks it, because I do not have any other ideas :( Tomasz Orlowski Tomasz Orłowski napisał(a): > Thanks Tomasz for quick answer. > > Paradoxically latest rev 10517 gives me bigger probability to have > successful boot :oP > > I've attached 3 full serial console logs: > 2 fails + 1 success (gosh it really took me some time to get this one ;O) ) > > > Thanks > > PS: I've tried it with 2 USB Sticks and 2,5" disk with IDE2USB > connector, so I think it is not storage issue. > > > > > fail nr1: > --------------------------------------------------------------------------------------- > CFE version 1.0.37 for BCM947XX (32bit,SP,LE) > Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain) > Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. > > Initializing Arena > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 > rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) > CPU type 0x29006: 264MHz > Total memory: 33554432 KBytes > > Total memory used by CFE: 0x80800000 - 0x8089B590 (636304) > Initialized Data: 0x80831700 - 0x80833DE0 (9952) > BSS Area: 0x80833DE0 - 0x80835590 (6064) > Local Heap: 0x80835590 - 0x80899590 (409600) > Stack Area: 0x80899590 - 0x8089B590 (8192) > Text (code) segment: 0x80800000 - 0x80831700 (202496) > Boot area (physical): 0x0089C000 - 0x008DC000 > Relocation Factor: I:00000000 - D:00000000 > > Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask > 255.255.255.0 > gateway not set, nameserver not set > Null Rescue Flag. > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3740 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3 > 21:30:54 CEST 2007 > CPU revision is: 00029006 > ssb: Sonics Silicon Backplane found on address 0x18000000 > Determined physical RAM map: > memory: 02000000 @ 00000000 (usable) > Initrd not found or empty - disabling initrd > Built 1 zonelists. Total pages: 8128 > Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200 > Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 > bytes. > Primary data cache 16kB, 2-way, linesize 16 bytes. > Synthesized TLB refill handler (19 instructions). > Synthesized TLB load handler fastpath (31 instructions). > Synthesized TLB store handler fastpath (31 instructions). > Synthesized TLB modify handler fastpath (30 instructions). > PID hash table entries: 128 (order: 7, 512 bytes) > Using 132.000 MHz high precision timer. > Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > Memory: 29776k/32768k available (2117k kernel code, 2992k reserved, > 326k data, 120k init, 0k highmem) > Mount-cache hash table entries: 512 > Checking for 'wait' instruction... unavailable. > NET: Registered protocol family 16 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: fixing up bridge > PCI: Fixing up device 0000:00:00.0 > NET: Registered protocol family 2 > IP route cache hash table entries: 256 (order: -2, 1024 bytes) > TCP established hash table entries: 1024 (order: 0, 4096 bytes) > TCP bind hash table entries: 512 (order: -1, 2048 bytes) > TCP: Hash tables configured (established 1024 bind 512) > TCP reno registered > JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. > io scheduler noop registered > io scheduler deadline registered (default) > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A > serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A > b44.c:v1.01 (Jun 16, 2006) > eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70 > eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d > flash init: 0x1c000000 0x02000000 > Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank > Amd/Fujitsu Extended Query Table at 0x0040 > Physically mapped flash: CFI does not contain boot bank location. > Assuming top. > number of CFI chips: 1 > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. > Flash device: 0x800000 at 0x1fc00000 > bootloader size: 262144 > Physically mapped flash: Filesystem type: jffs2 > Updating TRX offsets and length: > old trx = [0x0000001c, 0x000008f0, 0x000e0000], len=0x00101000 > crc32=0x039d55c8 > new trx = [0x0000001c, 0x000008f0, 0x000e0000], len=0x000e0000 > crc32=0xf27087a7 > Done > Creating 4 MTD partitions on "Physically mapped flash": > 0x00000000-0x00040000 : "cfe" > 0x00040000-0x007f0000 : "linux" > 0x00120000-0x007f0000 : "rootfs" > 0x007f0000-0x00800000 : "nvram" > PCI: Enabling device 0000:00:03.2 (0000 -> 0002) > PCI: Fixing up device 0000:00:03.2 > ehci_hcd 0000:00:03.2: EHCI Host Controller > ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000 > ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > USB Universal Host Controller Interface driver v3.0 > PCI: Enabling device 0000:00:03.0 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.0 > uhci_hcd 0000:00:03.0: UHCI Host Controller > uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PCI: Enabling device 0000:00:03.1 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.1 > uhci_hcd 0000:00:03.1: UHCI Host Controller > uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb 1-2: new high speed USB device using ehci_hcd and address 2 > Initializing USB Mass Storage driver... > usb 1-2: configuration #1 chosen from 1 choice > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com> > All bugs added by David S. Miller <davem at redhat.com> > Waiting 10sec before mounting root device... > Time: MIPS clocksource has been installed. > scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0 > ANSI: 0 CCS > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 120k freed > Algorithmics/MIPS FPU Emulator v1.5 > INIT: version 2.86 booting > /etc/init.d/rc: line 77: 133 Segmentation fault $@ > /etc/init.d/rc: line 77: 149 Segmentation fault $@ > /etc/rcS.d/S02mountkernfs.sh: line 22: 160 Bus error > grep -E -qs "sysfs\$" /proc/filesystems > /lib/init/mount-functions.sh: line 34: 162 Bus error > grep -E -qs "$1\$" /proc/filesystems > /lib/init/mount-functions.sh: line 34: 163 Bus error > grep -E -qs "$2\$" /proc/filesystems > * Filesystem types 'usbfs' and 'usbdevfs' are not supported. Skipping > mount. > /etc/init.d/rc: line 77: 152 Segmentation fault $@ > /etc/rcS.d/S03udev: line 154: 176 Bus error grep -q > '[[:space:]]tmpfs$' /proc/filesystems > * udev requires tmpfs support, not started. > failed! > /etc/init.d/rc: line 77: 174 Segmentation fault $@ > * Files under mount point '/dev/shm' will be hidden. > /lib/init/mount-functions.sh: line 34: 199 Bus error > grep -E -qs "$1\$" /proc/filesystems > /lib/init/mount-functions.sh: line 34: 200 Bus error > grep -E -qs "$2\$" /proc/filesystems > * Filesystem type 'devpts' is not supported. Skipping mount. > /etc/init.d/rc: line 77: 189 Segmentation fault $@ > /lib/init/vars.sh: line 10: 209 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/init.d/rc: line 77: 208 Segmentation fault $@ > /lib/init/vars.sh: line 10: 214 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/rcS.d/S10checkroot.sh: line 24: 217 Segmentation fault ( [ > "$PASS" != 0 ] && [ "$PASS" != "" ] ) > /etc/rcS.d/S10checkroot.sh: line 24: 218 Segmentation fault ( [ > "$FSTYPE" = "nfs" ] || [ "$FSTYPE" = "nfs4" ] ) > Activating swap:. > /etc/rcS.d/S10checkroot.sh: line 24: 224 Segmentation fault > which on_ac_power >/dev/null 2>&1 > EXT3 FS on sda1, internal journal > /etc/init.d/rc: line 77: 213 Segmentation fault $@ > Setting the system clock.. > Cannot access the Hardware Clock via any known method. > Use the --debug option to see the details of our search for an access > method. > System Clock set. Local time: Sat Jan 1 00:00:19 UTC 2000. > /etc/init.d/rc: line 77: 235 Segmentation fault $@ > /lib/init/vars.sh: line 10: 242 Bus error egrep -qw > 'quiet' /proc/cmdline > /lib/init/mount-functions.sh: line 23: 246 Segmentation fault > which selinuxenabled >/dev/null 2>&1 > /etc/rcS.d/S12mtab.sh: line 39: 248 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 251 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 66: 253 Bus error grep -E > -qs "sysfs\$" /proc/filesystems > /etc/rcS.d/S12mtab.sh: line 39: 257 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 261 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 264 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 267 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 270 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/rcS.d/S12mtab.sh: line 39: 273 Bus error grep -E > -sq "^([^ ]+) +$2 +" /etc/mtab </dev/null > /etc/init.d/rc: line 77: 241 Segmentation fault $@ > Cleaning up ifupdown.... > /etc/init.d/rc: line 77: 278 Segmentation fault $@ > Loading kernel module ieee80211_crypt. > Loading kernel module ieee80211softmac. > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > <jketreno at linux.intel.com> > Loading kernel module ieee80211. > Loading kernel module bcm43xx. > bcm43xx driver > /etc/rcS.d/S20module-init-tools: line 58: 288 Bus > error grep '^[^#]' $MODULES_FILE > 289 Segmentation fault | while read module args; do > [ "$module" ] || continue; load_module "$module" "$args"; > done > /etc/init.d/rc: line 77: 286 Segmentation fault $@ > /etc/init.d/rc: line 77: 300 Segmentation fault $@ > Loading device-mapper support. > /etc/init.d/rc: line 77: 307 Segmentation fault $@ > /lib/init/vars.sh: line 10: 315 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/rcS.d/S30checkfs.sh: line 62: 316 Segmentation fault which > on_ac_power >/dev/null 2>&1 > Will now check all file systems. > fsck 1.40-WIP (14-Nov-2006) > Checking all file systems. > Done checking file systems. > A log is being saved in /var/log/fsck/checkfs if that location is > writable. > /etc/init.d/rc: line 77: 314 Segmentation fault $@ > /etc/rcS.d/S30procps.sh: line 22: 322 Segmentation fault which > sysctl >/dev/null > /etc/init.d/rc: line 77: 321 Segmentation fault $@ > /lib/init/vars.sh: line 10: 330 Bus error egrep -qw > 'quiet' /proc/cmdline > Will now mount local filesystems:. > Will now activate swapfile swap:done. > /etc/init.d/rc: line 77: 329 Segmentation fault $@ > /lib/init/vars.sh: line 10: 343 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/init.d/bootclean: line 169: 344 Segmentation fault which > find >/dev/null 2>&1 > /etc/rcS.d/S36mountall-bootclean.sh: line 13: 342 Segmentation > fault /etc/init.d/bootclean > /etc/init.d/rc: line 77: 341 Segmentation fault $@ > /etc/init.d/rc: line 77: 345 Segmentation fault $@ > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > Added VLAN with VID == 1 to IF -:eth0:- > WARNING: VLAN 1 does not work with many switches, > consider another number if you have problems. > /etc/init.d/rc: line 77: 353 Segmentation fault $@ > Setting up networking.../etc/init.d/rc: line 77: 367 Segmentation > fault $@ > Configuring network interfaces...ifup: failed to open statefile > /etc/network/run/ifstate: No such file or directory > /etc/rcS.d/S40networking: line 74: 375 Bus error ifup -a > failed. > /etc/init.d/rc: line 77: 374 Segmentation fault $@ > /lib/init/vars.sh: line 10: 385 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/init.d/rc: line 77: 384 Segmentation fault $@ > /lib/init/vars.sh: line 10: 391 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/init.d/bootclean: line 169: 392 Segmentation fault which > find >/dev/null 2>&1 > /etc/rcS.d/S46mountnfs-bootclean.sh: line 13: 390 Segmentation > fault /etc/init.d/bootclean > /etc/init.d/rc: line 77: 389 Segmentation fault $@ > /lib/init/vars.sh: line 10: 397 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/rcS.d/S55bootmisc.sh: line 16: 398 Bus error grep > -q ^utmp: /etc/group > /etc/rcS.d/S55bootmisc.sh: line 16: 401 Segmentation fault > which dmesg >/dev/null 2>&1 > /etc/init.d/rc: line 77: 396 Segmentation fault $@ > /lib/init/vars.sh: line 10: 405 Bus error egrep -qw > 'quiet' /proc/cmdline > Initializing random number generator...done. > /etc/init.d/rc: line 77: 403 Segmentation fault $@ > /etc/init.d/rc: line 77: 416 Segmentation fault $@ > /etc/init.d/rc: line 77: 420 Segmentation fault $@ > INIT: Entering runlevel: 2 > Starting system log daemon: syslogd/etc/rc2.d/S10sysklogd: line 14: > 430 Bus error chown root:adm /dev/xconsole > /etc/rc2.d/S10sysklogd: line 58: 431 Segmentation fault > start-stop-daemon --start --quiet --exec $binpath -- $SYSLOGD > . > /etc/init.d/rc: line 77: 428 Segmentation fault $@ > Starting kernel log daemon: klogd. > /etc/init.d/rc: line 77: 436 Segmentation fault $@ > Zaptel telephony kernel driver: FATAL: Module ztdummy not found. > Notice: Configuration file is /etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl' > > 1 error(s) detected > > /sbin/ztcfg failed. Check /etc/zaptel.confzaptel. > /etc/init.d/rc: line 77: 442 Segmentation fault $@ > /etc/init.d/rc: line 77: 449 Segmentation fault $@ > /etc/init.d/rc: line 77: 450 Segmentation fault $@ > /etc/rc2.d/S20openbsd-inetd: line 37: 452 Bus error > grep -q "^[0-9A-Za-z/]" /etc/inetd.conf > * Not starting internet superserver: no services enabled. > /etc/init.d/rc: line 77: 451 Segmentation fault $@ > /etc/init.d/rc: line 77: 457 Segmentation fault $@ > /etc/rc2.d/S20ssh: line 7: 459 Segmentation fault ( > /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null > /etc/init.d/rc: line 77: 458 Segmentation fault $@ > > > Signal 10 (BUS) caught by ps (procps version 3.2.7). > Please send bug reports to <feedback at lists.sf.net> or > <albert at users.sf.net> > Starting Asterisk PBX: > > Signal 10 (BUS) caught by ps (procps version 3.2.7). > Please send bug reports to <feedback at lists.sf.net> or > <albert at users.sf.net> > asterisk. > /etc/init.d/rc: line 77: 477 Segmentation fault $@ > Starting periodic command scheduler: crond. > /etc/init.d/rc: line 77: 499 Segmentation fault $@ > /lib/init/vars.sh: line 10: 510 Bus error egrep -qw > 'quiet' /proc/cmdline > Running local boot scripts (/etc/rc.local)/etc/rc2.d/S99rc.local: line > 17: 511 Segmentation fault /etc/rc.local > failed! > /etc/init.d/rc: line 77: 509 Segmentation fault $@ > /lib/init/vars.sh: line 10: 518 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/init.d/rc: line 77: 517 Segmentation fault $@ > /lib/init/vars.sh: line 10: 521 Bus error egrep -qw > 'quiet' /proc/cmdline > /etc/rc2.d/S99stop-bootlogd: line 17: 520 Segmentation fault > /etc/init.d/bootlogd stop > /etc/init.d/rc: line 77: 519 Segmentation fault $@ > > Debian GNU/Linux 4.0 asus-debian ttyS0 > > asus-debian login: > > --------------------------------------------------------------------------------------- > > fail nr2: > --------------------------------------------------------------------------------------- > CFE version 1.0.37 for BCM947XX (32bit,SP,LE) > Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain) > Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. > > Initializing Arena > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 > rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) > CPU type 0x29006: 264MHz > Total memory: 33554432 KBytes > > Total memory used by CFE: 0x80800000 - 0x8089B590 (636304) > Initialized Data: 0x80831700 - 0x80833DE0 (9952) > BSS Area: 0x80833DE0 - 0x80835590 (6064) > Local Heap: 0x80835590 - 0x80899590 (409600) > Stack Area: 0x80899590 - 0x8089B590 (8192) > Text (code) segment: 0x80800000 - 0x80831700 (202496) > Boot area (physical): 0x0089C000 - 0x008DC000 > Relocation Factor: I:00000000 - D:00000000 > > Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask > 255.255.255.0 > gateway not set, nameserver not set > Null Rescue Flag. > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3740 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3 > 21:30:54 CEST 2007 > CPU revision is: 00029006 > ssb: Sonics Silicon Backplane found on address 0x18000000 > Determined physical RAM map: > memory: 02000000 @ 00000000 (usable) > Initrd not found or empty - disabling initrd > Built 1 zonelists. Total pages: 8128 > Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200 > Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 > bytes. > Primary data cache 16kB, 2-way, linesize 16 bytes. > Synthesized TLB refill handler (19 instructions). > Synthesized TLB load handler fastpath (31 instructions). > Synthesized TLB store handler fastpath (31 instructions). > Synthesized TLB modify handler fastpath (30 instructions). > PID hash table entries: 128 (order: 7, 512 bytes) > Using 132.000 MHz high precision timer. > Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > Memory: 29776k/32768k available (2117k kernel code, 2992k reserved, > 326k data, 120k init, 0k highmem) > Mount-cache hash table entries: 512 > Checking for 'wait' instruction... unavailable. > NET: Registered protocol family 16 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: fixing up bridge > PCI: Fixing up device 0000:00:00.0 > NET: Registered protocol family 2 > IP route cache hash table entries: 256 (order: -2, 1024 bytes) > TCP established hash table entries: 1024 (order: 0, 4096 bytes) > TCP bind hash table entries: 512 (order: -1, 2048 bytes) > TCP: Hash tables configured (established 1024 bind 512) > TCP reno registered > JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. > io scheduler noop registered > io scheduler deadline registered (default) > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A > serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A > b44.c:v1.01 (Jun 16, 2006) > eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70 > eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d > flash init: 0x1c000000 0x02000000 > Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank > Amd/Fujitsu Extended Query Table at 0x0040 > Physically mapped flash: CFI does not contain boot bank location. > Assuming top. > number of CFI chips: 1 > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. > Flash device: 0x800000 at 0x1fc00000 > bootloader size: 262144 > Creating 4 MTD partitions on "Physically mapped flash": > 0x00000000-0x00040000 : "cfe" > 0x00040000-0x007f0000 : "linux" > 0x00120000-0x007f0000 : "rootfs" > 0x007f0000-0x00800000 : "nvram" > PCI: Enabling device 0000:00:03.2 (0000 -> 0002) > PCI: Fixing up device 0000:00:03.2 > ehci_hcd 0000:00:03.2: EHCI Host Controller > ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000 > ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > USB Universal Host Controller Interface driver v3.0 > PCI: Enabling device 0000:00:03.0 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.0 > uhci_hcd 0000:00:03.0: UHCI Host Controller > uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PCI: Enabling device 0000:00:03.1 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.1 > uhci_hcd 0000:00:03.1: UHCI Host Controller > uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb 1-2: new high speed USB device using ehci_hcd and address 2 > Initializing USB Mass Storage driver... > usb 1-2: configuration #1 chosen from 1 choice > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com> > All bugs added by David S. Miller <davem at redhat.com> > Waiting 10sec before mounting root device... > Time: MIPS clocksource has been installed. > scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0 > ANSI: 0 CCS > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 120k freed > Algorithmics/MIPS FPU Emulator v1.5 > INIT: version 2.86 booting > /etc/init.d/rc: line 77: 133 Bus error $@ > /etc/init.d/rc: line 77: 149 Bus error $@ > /etc/init.d/rc: line 77: 152 Bus error $@ > /etc/rcS.d/S03udev: line 60: 187 Done grep > '^[^#]' /etc/udev/links.conf > 188 Bus error | while read type name arg1; do > [ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ] > || continue; case "$type" in > L) > ln -s $arg1 /dev/$name > ;; > D) > mkdir -p /dev/$name > ;; > M) > mknod -m 600 /dev/$name $arg1 > ;; > *) > log_warning_msg "links.conf: unparseable line ($type $name > $arg1)" > ;; > esac; if [ -x /sbin/restorecon ]; then > /sbin/restorecon /dev/$name >/dev/null 2>/dev/null; > fi; > done > /etc/init.d/rc: line 77: 175 Bus error $@ > /etc/init.d/rc: line 77: 207 Bus error $@ > /etc/init.d/rc: line 77: 220 Bus error $@ > /etc/rcS.d/S10checkroot.sh: line 24: 229 Bus error ( [ > "$PASS" != 0 ] && [ "$PASS" != "" ] ) > /etc/rcS.d/S10checkroot.sh: line 24: 230 Bus error ( [ > "$FSTYPE" = "nfs" ] || [ "$FSTYPE" = "nfs4" ] ) > Activating swap:. > /etc/rcS.d/S10checkroot.sh: line 24: 236 Bus error > which on_ac_power >/dev/null 2>&1 > EXT3 FS on sda1, internal journal > /etc/init.d/rc: line 77: 225 Bus error $@ > Setting the system clock.. > Cannot access the Hardware Clock via any known method. > Use the --debug option to see the details of our search for an access > method. > System Clock set. Local time: Sat Jan 1 00:00:19 UTC 2000. > /etc/init.d/rc: line 77: 247 Bus error $@ > /lib/init/mount-functions.sh: line 23: 258 Bus error > which selinuxenabled >/dev/null 2>&1 > /etc/init.d/rc: line 77: 253 Bus error $@ > Cleaning up ifupdown.... > /etc/init.d/rc: line 77: 302 Bus error $@ > Loading kernel module ieee80211_crypt. > Loading kernel module ieee80211softmac. > ieee80211: 802.11 data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > <jketreno at linux.intel.com> > Loading kernel module ieee80211. > Loading kernel module bcm43xx. > bcm43xx driver > /etc/rcS.d/S20module-init-tools: line 58: 312 > Done grep '^[^#]' $MODULES_FILE > 313 Bus error | while read module args; do > [ "$module" ] || continue; load_module "$module" "$args"; > done > /etc/init.d/rc: line 77: 310 Bus error $@ > /etc/init.d/rc: line 77: 319 Bus error $@ > Loading device-mapper support. > /etc/init.d/rc: line 77: 326 Bus error $@ > /etc/rcS.d/S30checkfs.sh: line 62: 335 Bus error which > on_ac_power >/dev/null 2>&1 > Will now check all file systems. > fsck 1.40-WIP (14-Nov-2006) > Checking all file systems. > Done checking file systems. > A log is being saved in /var/log/fsck/checkfs if that location is > writable. > /etc/init.d/rc: line 77: 333 Bus error $@ > /etc/rcS.d/S30procps.sh: line 22: 341 Bus error which > sysctl >/dev/null > /etc/init.d/rc: line 77: 340 Bus error $@ > Will now mount local filesystems:. > Will now activate swapfile swap:done. > /etc/init.d/rc: line 77: 348 Bus error $@ > /etc/init.d/bootclean: line 169: 363 Bus error which > find >/dev/null 2>&1 > /etc/rcS.d/S36mountall-bootclean.sh: line 13: 361 Bus > error /etc/init.d/bootclean > /etc/init.d/rc: line 77: 360 Bus error $@ > /etc/init.d/rc: line 77: 364 Bus error $@ > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > /etc/rcS.d/S38vlans: line 4: 374 Bus error ifconfig > eth0 0.0.0.0 > Added VLAN with VID == 1 to IF -:eth0:- > WARNING: VLAN 1 does not work with many switches, > consider another number if you have problems. > /etc/init.d/rc: line 77: 373 Bus error $@ > Setting up networking.../etc/init.d/rc: line 77: 386 Bus > error $@ > Configuring network interfaces...ifup: failed to open statefile > /etc/network/run/ifstate: No such file or directory > /etc/rcS.d/S40networking: line 74: 394 Bus error ifup -a > failed. > /etc/init.d/rc: line 77: 393 Bus error $@ > /etc/init.d/rc: line 77: 403 Bus error $@ > /etc/init.d/bootclean: line 169: 411 Bus error which > find >/dev/null 2>&1 > /etc/rcS.d/S46mountnfs-bootclean.sh: line 13: 409 Bus > error /etc/init.d/bootclean > /etc/init.d/rc: line 77: 408 Bus error $@ > /etc/rcS.d/S55bootmisc.sh: line 16: 419 Bus error > chgrp utmp /var/run/utmp > /etc/rcS.d/S55bootmisc.sh: line 16: 422 Bus error > which dmesg >/dev/null 2>&1 > /etc/init.d/rc: line 77: 415 Bus error $@ > /etc/init.d/rc: line 77: 424 Bus error $@ > /etc/init.d/rc: line 77: 431 Bus error $@ > /etc/init.d/rc: line 77: 435 Bus error $@ > INIT: Entering runlevel: 2 > Starting system log daemon: syslogd/etc/rc2.d/S10sysklogd: line 14: > 445 Bus error chown root:adm /dev/xconsole > . > /etc/init.d/rc: line 77: 443 Bus error $@ > Starting kernel log daemon: klogd. > /etc/init.d/rc: line 77: 451 Bus error $@ > Zaptel telephony kernel driver: FATAL: Module ztdummy not found. > Notice: Configuration file is /etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl' > > 1 error(s) detected > > /etc/rc2.d/S15zaptel: line 120: 460 Bus error $DAEMON > $DAEMON_OPTS > /sbin/ztcfg failed. Check /etc/zaptel.confzaptel. > /etc/init.d/rc: line 77: 457 Bus error $@ > /etc/init.d/rc: line 77: 464 Bus error $@ > /etc/init.d/rc: line 77: 465 Bus error $@ > * Not starting internet superserver: no services enabled. > /etc/init.d/rc: line 77: 467 Bus error $@ > /etc/init.d/rc: line 77: 473 Bus error $@ > /etc/rc2.d/S20ssh: line 7: 475 Bus error ( > /usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null > /etc/init.d/rc: line 77: 474 Bus error $@ > > > Signal 10 (BUS) caught by ps (procps version 3.2.7). > Please send bug reports to <feedback at lists.sf.net> or > <albert at users.sf.net> > awk: cmd. line:1: fatal error: internal error > Starting Asterisk PBX: > > Signal 10 (BUS) caught by ps (procps version 3.2.7). > Please send bug reports to <feedback at lists.sf.net> or > <albert at users.sf.net> > awk: cmd. line:1: fatal error: internal error > asterisk. > /etc/init.d/rc: line 77: 493 Bus error $@ > Jan 1 01:00:38 WARNING[508]: manager.c:1743 init_manager: Unable to > bind socket: Cannot assign requested address > Starting periodic command scheduler: crond. > /etc/init.d/rc: line 77: 515 Bus error $@ > Running local boot scripts (/etc/rc.local)/etc/rc2.d/S99rc.local: line > 17: 527 Bus error /etc/rc.local > failed! > /etc/init.d/rc: line 77: 525 Bus error $@ > /etc/init.d/rc: line 77: 533 Bus error $@ > /etc/rc2.d/S99stop-bootlogd: line 17: 536 Bus error > /etc/init.d/bootlogd stop > /etc/init.d/rc: line 77: 535 Bus error $@ > --------------------------------------------------------------------------------------- > > successful boot > --------------------------------------------------------------------------------------- > > CFE version 1.0.37 for BCM947XX (32bit,SP,LE) > Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain) > Copyright (C) 2000,2001,2002,2003 Broadcom Corporation. > > Initializing Arena > Initializing Devices. > et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0 > rndis0: Broadcom USB RNDIS Network Adapter (P-t-P) > CPU type 0x29006: 264MHz > Total memory: 33554432 KBytes > > Total memory used by CFE: 0x80800000 - 0x8089B590 (636304) > Initialized Data: 0x80831700 - 0x80833DE0 (9952) > BSS Area: 0x80833DE0 - 0x80835590 (6064) > Local Heap: 0x80835590 - 0x80899590 (409600) > Stack Area: 0x80899590 - 0x8089B590 (8192) > Text (code) segment: 0x80800000 - 0x80831700 (202496) > Boot area (physical): 0x0089C000 - 0x008DC000 > Relocation Factor: I:00000000 - D:00000000 > > Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask > 255.255.255.0 > gateway not set, nameserver not set > Null Rescue Flag. > Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) > Loading: .. 3740 bytes read > Entry at 0x80001000 > Closing network. > Starting program at 0x80001000 > Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3 > 21:30:54 CEST 2007 > CPU revision is: 00029006 > ssb: Sonics Silicon Backplane found on address 0x18000000 > Determined physical RAM map: > memory: 02000000 @ 00000000 (usable) > Initrd not found or empty - disabling initrd > Built 1 zonelists. Total pages: 8128 > Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200 > Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 > bytes. > Primary data cache 16kB, 2-way, linesize 16 bytes. > Synthesized TLB refill handler (19 instructions). > Synthesized TLB load handler fastpath (31 instructions). > Synthesized TLB store handler fastpath (31 instructions). > Synthesized TLB modify handler fastpath (30 instructions). > PID hash table entries: 128 (order: 7, 512 bytes) > Using 132.000 MHz high precision timer. > Dentry cache hash table entries: 4096 (order: 2, 16384 bytes) > Inode-cache hash table entries: 2048 (order: 1, 8192 bytes) > Memory: 29776k/32768k available (2117k kernel code, 2992k reserved, > 326k data, 120k init, 0k highmem) > Mount-cache hash table entries: 512 > Checking for 'wait' instruction... unavailable. > NET: Registered protocol family 16 > SCSI subsystem initialized > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: fixing up bridge > PCI: Fixing up device 0000:00:00.0 > NET: Registered protocol family 2 > IP route cache hash table entries: 256 (order: -2, 1024 bytes) > TCP established hash table entries: 1024 (order: 0, 4096 bytes) > TCP bind hash table entries: 512 (order: -1, 2048 bytes) > TCP: Hash tables configured (established 1024 bind 512) > TCP reno registered > JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc. > io scheduler noop registered > io scheduler deadline registered (default) > Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled > serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A > serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A > b44.c:v1.01 (Jun 16, 2006) > eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70 > eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d > flash init: 0x1c000000 0x02000000 > Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank > Amd/Fujitsu Extended Query Table at 0x0040 > Physically mapped flash: CFI does not contain boot bank location. > Assuming top. > number of CFI chips: 1 > cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. > Flash device: 0x800000 at 0x1fc00000 > bootloader size: 262144 > Creating 4 MTD partitions on "Physically mapped flash": > 0x00000000-0x00040000 : "cfe" > 0x00040000-0x007f0000 : "linux" > 0x00120000-0x007f0000 : "rootfs" > 0x007f0000-0x00800000 : "nvram" > PCI: Enabling device 0000:00:03.2 (0000 -> 0002) > PCI: Fixing up device 0000:00:03.2 > ehci_hcd 0000:00:03.2: EHCI Host Controller > ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1 > ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000 > ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 4 ports detected > USB Universal Host Controller Interface driver v3.0 > PCI: Enabling device 0000:00:03.0 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.0 > uhci_hcd 0000:00:03.0: UHCI Host Controller > uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > PCI: Enabling device 0000:00:03.1 (0000 -> 0001) > PCI: Fixing up device 0000:00:03.1 > uhci_hcd 0000:00:03.1: UHCI Host Controller > uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > usb 1-2: new high speed USB device using ehci_hcd and address 2 > Initializing USB Mass Storage driver... > usb 1-2: configuration #1 chosen from 1 choice > scsi0 : SCSI emulation for USB Mass Storage devices > usbcore: registered new interface driver usb-storage > USB Mass Storage support registered. > ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack > ip_tables: (C) 2000-2006 Netfilter Core Team > TCP cubic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > 802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com> > All bugs added by David S. Miller <davem at redhat.com> > Waiting 10sec before mounting root device... > Time: MIPS clocksource has been installed. > scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0 > ANSI: 0 CCS > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB) > sda: Write Protect is off > sda: assuming drive cache: write through > sda: sda1 sda2 > sd 0:0:0:0: Attached scsi disk sda > EXT3-fs: INFO: recovery required on readonly filesystem. > EXT3-fs: write access will be enabled during recovery. > kjournald starting. Commit interval 5 seconds > EXT3-fs: recovery complete. > EXT3-fs: mounted filesystem with ordered data mode. > VFS: Mounted root (ext3 filesystem) readonly. > Freeing unused kernel memory: 120k freed > Algorithmics/MIPS FPU Emulator v1.5 > INIT: version 2.86 booting > Starting the hotplug events dispatcher: udevd. > Synthesizing the initial hotplug events...done. > Waiting for /dev to be fully populated...ieee80211: 802.11 > data/management/control stack, git-1.1.13 > ieee80211: Copyright (C) 2004-2005 Intel Corporation > <jketreno at linux.intel.com> > bcm43xx driver > done. > Activating swap:. > Will now check root file system:fsck 1.40-WIP (14-Nov-2006) > [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda1 > /dev/sda1: clean, 15866/1177344 files, 200094/2351152 blocks > . > EXT3 FS on sda1, internal journal > Setting the system clock.. > Cannot access the Hardware Clock via any known method. > Use the --debug option to see the details of our search for an access > method. > System Clock set. Local time: Sat Jan 1 00:00:23 UTC 2000. > Cleaning up ifupdown.... > Loading kernel module ieee80211_crypt. > Loading kernel module ieee80211softmac. > Loading kernel module ieee80211. > Loading kernel module bcm43xx. > Loading device-mapper support. > Will now check all file systems. > fsck 1.40-WIP (14-Nov-2006) > Checking all file systems. > Done checking file systems. > A log is being saved in /var/log/fsck/checkfs if that location is > writable. > Setting kernel variables...done. > Will now mount local filesystems:. > Will now activate swapfile swap:done. > Cleaning /tmp...done. > Cleaning /var/run...done. > Cleaning /var/lock...done. > b44: eth0: Link is up at 100 Mbps, full duplex. > b44: eth0: Flow control is off for TX and off for RX. > Added VLAN with VID == 1 to IF -:eth0:- > WARNING: VLAN 1 does not work with many switches, > consider another number if you have problems. > Setting up networking.... > Configuring network interfaces...done. > Initializing random number generator...done. > INIT: Entering runlevel: 2 > Starting system log daemon: syslogd. > Starting kernel log daemon: klogd. > Zaptel telephony kernel driver: FATAL: Module ztdummy not found. > Notice: Configuration file is /etc/zaptel.conf > line 0: Unable to open master device '/dev/zap/ctl' > > 1 error(s) detected > > /sbin/ztcfg failed. Check /etc/zaptel.confzaptel. > * Not starting internet superserver: no services enabled. > Starting OpenBSD Secure Shell server: sshd. > Starting Asterisk PBX: asterisk. > Starting periodic command scheduler: crond. > Running local boot scripts (/etc/rc.local). > > Debian GNU/Linux 4.0 asus-debian ttyS0 > > asus-debian login: > > > > |