[debian-non-standard] segmentation faults and bus errors - abandoned all hope
Tomasz Orłowski
t.orlowski at wsisiz.edu.pl
Sat Feb 23 19:46:21 CET 2008
Tomasz Chmielewski napisał(a):
>
> Don't even try anything other than 2.6.19.2 that comes from OpenWrt
> - it won't work reliably.
>
> Could you post dmesg + errors for 2.6.19.2 from http://wpkg.org? Or
> better, full serial console log for that kernel.
>
>
Thanks Tomasz for quick answer.
Paradoxically latest rev 10517 gives me bigger probability to have
successful boot :oP
I've attached 3 full serial console logs:
2 fails + 1 success (gosh it really took me some time to get this one ;O) )
Thanks
PS: I've tried it with 2 USB Sticks and 2,5" disk with IDE2USB
connector, so I think it is not storage issue.
fail nr1:
---------------------------------------------------------------------------------------
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B590 (636304)
Initialized Data: 0x80831700 - 0x80833DE0 (9952)
BSS Area: 0x80833DE0 - 0x80835590 (6064)
Local Heap: 0x80835590 - 0x80899590 (409600)
Stack Area: 0x80899590 - 0x8089B590 (8192)
Text (code) segment: 0x80800000 - 0x80831700 (202496)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3740 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3
21:30:54 CEST 2007
CPU revision is: 00029006
ssb: Sonics Silicon Backplane found on address 0x18000000
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 8128
Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16
bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 132.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29776k/32768k available (2117k kernel code, 2992k reserved,
326k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: fixing up bridge
PCI: Fixing up device 0000:00:00.0
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
b44.c:v1.01 (Jun 16, 2006)
eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70
eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location.
Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Physically mapped flash: Filesystem type: jffs2
Updating TRX offsets and length:
old trx = [0x0000001c, 0x000008f0, 0x000e0000], len=0x00101000
crc32=0x039d55c8
new trx = [0x0000001c, 0x000008f0, 0x000e0000], len=0x000e0000
crc32=0xf27087a7
Done
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x00120000-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
PCI: Fixing up device 0000:00:03.2
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.0
uhci_hcd 0000:00:03.0: UHCI Host Controller
uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.1
uhci_hcd 0000:00:03.1: UHCI Host Controller
uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
Waiting 10sec before mounting root device...
Time: MIPS clocksource has been installed.
scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0
ANSI: 0 CCS
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Algorithmics/MIPS FPU Emulator v1.5
INIT: version 2.86 booting
/etc/init.d/rc: line 77: 133 Segmentation fault $@
/etc/init.d/rc: line 77: 149 Segmentation fault $@
/etc/rcS.d/S02mountkernfs.sh: line 22: 160 Bus error
grep -E -qs "sysfs\$" /proc/filesystems
/lib/init/mount-functions.sh: line 34: 162 Bus error
grep -E -qs "$1\$" /proc/filesystems
/lib/init/mount-functions.sh: line 34: 163 Bus error
grep -E -qs "$2\$" /proc/filesystems
* Filesystem types 'usbfs' and 'usbdevfs' are not supported. Skipping
mount.
/etc/init.d/rc: line 77: 152 Segmentation fault $@
/etc/rcS.d/S03udev: line 154: 176 Bus error grep -q
'[[:space:]]tmpfs$' /proc/filesystems
* udev requires tmpfs support, not started.
failed!
/etc/init.d/rc: line 77: 174 Segmentation fault $@
* Files under mount point '/dev/shm' will be hidden.
/lib/init/mount-functions.sh: line 34: 199 Bus error
grep -E -qs "$1\$" /proc/filesystems
/lib/init/mount-functions.sh: line 34: 200 Bus error
grep -E -qs "$2\$" /proc/filesystems
* Filesystem type 'devpts' is not supported. Skipping mount.
/etc/init.d/rc: line 77: 189 Segmentation fault $@
/lib/init/vars.sh: line 10: 209 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/init.d/rc: line 77: 208 Segmentation fault $@
/lib/init/vars.sh: line 10: 214 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/rcS.d/S10checkroot.sh: line 24: 217 Segmentation fault ( [
"$PASS" != 0 ] && [ "$PASS" != "" ] )
/etc/rcS.d/S10checkroot.sh: line 24: 218 Segmentation fault ( [
"$FSTYPE" = "nfs" ] || [ "$FSTYPE" = "nfs4" ] )
Activating swap:.
/etc/rcS.d/S10checkroot.sh: line 24: 224 Segmentation fault
which on_ac_power >/dev/null 2>&1
EXT3 FS on sda1, internal journal
/etc/init.d/rc: line 77: 213 Segmentation fault $@
Setting the system clock..
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access
method.
System Clock set. Local time: Sat Jan 1 00:00:19 UTC 2000.
/etc/init.d/rc: line 77: 235 Segmentation fault $@
/lib/init/vars.sh: line 10: 242 Bus error egrep -qw
'quiet' /proc/cmdline
/lib/init/mount-functions.sh: line 23: 246 Segmentation fault
which selinuxenabled >/dev/null 2>&1
/etc/rcS.d/S12mtab.sh: line 39: 248 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 251 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 66: 253 Bus error grep -E
-qs "sysfs\$" /proc/filesystems
/etc/rcS.d/S12mtab.sh: line 39: 257 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 261 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 264 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 267 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 270 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/rcS.d/S12mtab.sh: line 39: 273 Bus error grep -E
-sq "^([^ ]+) +$2 +" /etc/mtab </dev/null
/etc/init.d/rc: line 77: 241 Segmentation fault $@
Cleaning up ifupdown....
/etc/init.d/rc: line 77: 278 Segmentation fault $@
Loading kernel module ieee80211_crypt.
Loading kernel module ieee80211softmac.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
Loading kernel module ieee80211.
Loading kernel module bcm43xx.
bcm43xx driver
/etc/rcS.d/S20module-init-tools: line 58: 288 Bus
error grep '^[^#]' $MODULES_FILE
289 Segmentation fault | while read module args; do
[ "$module" ] || continue; load_module "$module" "$args";
done
/etc/init.d/rc: line 77: 286 Segmentation fault $@
/etc/init.d/rc: line 77: 300 Segmentation fault $@
Loading device-mapper support.
/etc/init.d/rc: line 77: 307 Segmentation fault $@
/lib/init/vars.sh: line 10: 315 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/rcS.d/S30checkfs.sh: line 62: 316 Segmentation fault which
on_ac_power >/dev/null 2>&1
Will now check all file systems.
fsck 1.40-WIP (14-Nov-2006)
Checking all file systems.
Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is
writable.
/etc/init.d/rc: line 77: 314 Segmentation fault $@
/etc/rcS.d/S30procps.sh: line 22: 322 Segmentation fault which
sysctl >/dev/null
/etc/init.d/rc: line 77: 321 Segmentation fault $@
/lib/init/vars.sh: line 10: 330 Bus error egrep -qw
'quiet' /proc/cmdline
Will now mount local filesystems:.
Will now activate swapfile swap:done.
/etc/init.d/rc: line 77: 329 Segmentation fault $@
/lib/init/vars.sh: line 10: 343 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/init.d/bootclean: line 169: 344 Segmentation fault which
find >/dev/null 2>&1
/etc/rcS.d/S36mountall-bootclean.sh: line 13: 342 Segmentation
fault /etc/init.d/bootclean
/etc/init.d/rc: line 77: 341 Segmentation fault $@
/etc/init.d/rc: line 77: 345 Segmentation fault $@
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
/etc/init.d/rc: line 77: 353 Segmentation fault $@
Setting up networking.../etc/init.d/rc: line 77: 367 Segmentation
fault $@
Configuring network interfaces...ifup: failed to open statefile
/etc/network/run/ifstate: No such file or directory
/etc/rcS.d/S40networking: line 74: 375 Bus error ifup -a
failed.
/etc/init.d/rc: line 77: 374 Segmentation fault $@
/lib/init/vars.sh: line 10: 385 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/init.d/rc: line 77: 384 Segmentation fault $@
/lib/init/vars.sh: line 10: 391 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/init.d/bootclean: line 169: 392 Segmentation fault which
find >/dev/null 2>&1
/etc/rcS.d/S46mountnfs-bootclean.sh: line 13: 390 Segmentation
fault /etc/init.d/bootclean
/etc/init.d/rc: line 77: 389 Segmentation fault $@
/lib/init/vars.sh: line 10: 397 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/rcS.d/S55bootmisc.sh: line 16: 398 Bus error grep
-q ^utmp: /etc/group
/etc/rcS.d/S55bootmisc.sh: line 16: 401 Segmentation fault
which dmesg >/dev/null 2>&1
/etc/init.d/rc: line 77: 396 Segmentation fault $@
/lib/init/vars.sh: line 10: 405 Bus error egrep -qw
'quiet' /proc/cmdline
Initializing random number generator...done.
/etc/init.d/rc: line 77: 403 Segmentation fault $@
/etc/init.d/rc: line 77: 416 Segmentation fault $@
/etc/init.d/rc: line 77: 420 Segmentation fault $@
INIT: Entering runlevel: 2
Starting system log daemon: syslogd/etc/rc2.d/S10sysklogd: line 14:
430 Bus error chown root:adm /dev/xconsole
/etc/rc2.d/S10sysklogd: line 58: 431 Segmentation fault
start-stop-daemon --start --quiet --exec $binpath -- $SYSLOGD
.
/etc/init.d/rc: line 77: 428 Segmentation fault $@
Starting kernel log daemon: klogd.
/etc/init.d/rc: line 77: 436 Segmentation fault $@
Zaptel telephony kernel driver: FATAL: Module ztdummy not found.
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
/sbin/ztcfg failed. Check /etc/zaptel.confzaptel.
/etc/init.d/rc: line 77: 442 Segmentation fault $@
/etc/init.d/rc: line 77: 449 Segmentation fault $@
/etc/init.d/rc: line 77: 450 Segmentation fault $@
/etc/rc2.d/S20openbsd-inetd: line 37: 452 Bus error
grep -q "^[0-9A-Za-z/]" /etc/inetd.conf
* Not starting internet superserver: no services enabled.
/etc/init.d/rc: line 77: 451 Segmentation fault $@
/etc/init.d/rc: line 77: 457 Segmentation fault $@
/etc/rc2.d/S20ssh: line 7: 459 Segmentation fault (
/usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null
/etc/init.d/rc: line 77: 458 Segmentation fault $@
Signal 10 (BUS) caught by ps (procps version 3.2.7).
Please send bug reports to <feedback at lists.sf.net> or
<albert at users.sf.net>
Starting Asterisk PBX:
Signal 10 (BUS) caught by ps (procps version 3.2.7).
Please send bug reports to <feedback at lists.sf.net> or
<albert at users.sf.net>
asterisk.
/etc/init.d/rc: line 77: 477 Segmentation fault $@
Starting periodic command scheduler: crond.
/etc/init.d/rc: line 77: 499 Segmentation fault $@
/lib/init/vars.sh: line 10: 510 Bus error egrep -qw
'quiet' /proc/cmdline
Running local boot scripts (/etc/rc.local)/etc/rc2.d/S99rc.local: line
17: 511 Segmentation fault /etc/rc.local
failed!
/etc/init.d/rc: line 77: 509 Segmentation fault $@
/lib/init/vars.sh: line 10: 518 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/init.d/rc: line 77: 517 Segmentation fault $@
/lib/init/vars.sh: line 10: 521 Bus error egrep -qw
'quiet' /proc/cmdline
/etc/rc2.d/S99stop-bootlogd: line 17: 520 Segmentation fault
/etc/init.d/bootlogd stop
/etc/init.d/rc: line 77: 519 Segmentation fault $@
Debian GNU/Linux 4.0 asus-debian ttyS0
asus-debian login:
---------------------------------------------------------------------------------------
fail nr2:
---------------------------------------------------------------------------------------
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B590 (636304)
Initialized Data: 0x80831700 - 0x80833DE0 (9952)
BSS Area: 0x80833DE0 - 0x80835590 (6064)
Local Heap: 0x80835590 - 0x80899590 (409600)
Stack Area: 0x80899590 - 0x8089B590 (8192)
Text (code) segment: 0x80800000 - 0x80831700 (202496)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3740 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3
21:30:54 CEST 2007
CPU revision is: 00029006
ssb: Sonics Silicon Backplane found on address 0x18000000
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 8128
Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16
bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 132.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29776k/32768k available (2117k kernel code, 2992k reserved,
326k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: fixing up bridge
PCI: Fixing up device 0000:00:00.0
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
b44.c:v1.01 (Jun 16, 2006)
eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70
eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location.
Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x00120000-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
PCI: Fixing up device 0000:00:03.2
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.0
uhci_hcd 0000:00:03.0: UHCI Host Controller
uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.1
uhci_hcd 0000:00:03.1: UHCI Host Controller
uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
Waiting 10sec before mounting root device...
Time: MIPS clocksource has been installed.
scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0
ANSI: 0 CCS
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Algorithmics/MIPS FPU Emulator v1.5
INIT: version 2.86 booting
/etc/init.d/rc: line 77: 133 Bus error $@
/etc/init.d/rc: line 77: 149 Bus error $@
/etc/init.d/rc: line 77: 152 Bus error $@
/etc/rcS.d/S03udev: line 60: 187 Done grep
'^[^#]' /etc/udev/links.conf
188 Bus error | while read type name arg1; do
[ "$type" -a "$name" -a ! -e "/dev/$name" -a ! -L "/dev/$name" ]
|| continue; case "$type" in
L)
ln -s $arg1 /dev/$name
;;
D)
mkdir -p /dev/$name
;;
M)
mknod -m 600 /dev/$name $arg1
;;
*)
log_warning_msg "links.conf: unparseable line ($type $name
$arg1)"
;;
esac; if [ -x /sbin/restorecon ]; then
/sbin/restorecon /dev/$name >/dev/null 2>/dev/null;
fi;
done
/etc/init.d/rc: line 77: 175 Bus error $@
/etc/init.d/rc: line 77: 207 Bus error $@
/etc/init.d/rc: line 77: 220 Bus error $@
/etc/rcS.d/S10checkroot.sh: line 24: 229 Bus error ( [
"$PASS" != 0 ] && [ "$PASS" != "" ] )
/etc/rcS.d/S10checkroot.sh: line 24: 230 Bus error ( [
"$FSTYPE" = "nfs" ] || [ "$FSTYPE" = "nfs4" ] )
Activating swap:.
/etc/rcS.d/S10checkroot.sh: line 24: 236 Bus error
which on_ac_power >/dev/null 2>&1
EXT3 FS on sda1, internal journal
/etc/init.d/rc: line 77: 225 Bus error $@
Setting the system clock..
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access
method.
System Clock set. Local time: Sat Jan 1 00:00:19 UTC 2000.
/etc/init.d/rc: line 77: 247 Bus error $@
/lib/init/mount-functions.sh: line 23: 258 Bus error
which selinuxenabled >/dev/null 2>&1
/etc/init.d/rc: line 77: 253 Bus error $@
Cleaning up ifupdown....
/etc/init.d/rc: line 77: 302 Bus error $@
Loading kernel module ieee80211_crypt.
Loading kernel module ieee80211softmac.
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
Loading kernel module ieee80211.
Loading kernel module bcm43xx.
bcm43xx driver
/etc/rcS.d/S20module-init-tools: line 58: 312
Done grep '^[^#]' $MODULES_FILE
313 Bus error | while read module args; do
[ "$module" ] || continue; load_module "$module" "$args";
done
/etc/init.d/rc: line 77: 310 Bus error $@
/etc/init.d/rc: line 77: 319 Bus error $@
Loading device-mapper support.
/etc/init.d/rc: line 77: 326 Bus error $@
/etc/rcS.d/S30checkfs.sh: line 62: 335 Bus error which
on_ac_power >/dev/null 2>&1
Will now check all file systems.
fsck 1.40-WIP (14-Nov-2006)
Checking all file systems.
Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is
writable.
/etc/init.d/rc: line 77: 333 Bus error $@
/etc/rcS.d/S30procps.sh: line 22: 341 Bus error which
sysctl >/dev/null
/etc/init.d/rc: line 77: 340 Bus error $@
Will now mount local filesystems:.
Will now activate swapfile swap:done.
/etc/init.d/rc: line 77: 348 Bus error $@
/etc/init.d/bootclean: line 169: 363 Bus error which
find >/dev/null 2>&1
/etc/rcS.d/S36mountall-bootclean.sh: line 13: 361 Bus
error /etc/init.d/bootclean
/etc/init.d/rc: line 77: 360 Bus error $@
/etc/init.d/rc: line 77: 364 Bus error $@
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
/etc/rcS.d/S38vlans: line 4: 374 Bus error ifconfig
eth0 0.0.0.0
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
/etc/init.d/rc: line 77: 373 Bus error $@
Setting up networking.../etc/init.d/rc: line 77: 386 Bus
error $@
Configuring network interfaces...ifup: failed to open statefile
/etc/network/run/ifstate: No such file or directory
/etc/rcS.d/S40networking: line 74: 394 Bus error ifup -a
failed.
/etc/init.d/rc: line 77: 393 Bus error $@
/etc/init.d/rc: line 77: 403 Bus error $@
/etc/init.d/bootclean: line 169: 411 Bus error which
find >/dev/null 2>&1
/etc/rcS.d/S46mountnfs-bootclean.sh: line 13: 409 Bus
error /etc/init.d/bootclean
/etc/init.d/rc: line 77: 408 Bus error $@
/etc/rcS.d/S55bootmisc.sh: line 16: 419 Bus error
chgrp utmp /var/run/utmp
/etc/rcS.d/S55bootmisc.sh: line 16: 422 Bus error
which dmesg >/dev/null 2>&1
/etc/init.d/rc: line 77: 415 Bus error $@
/etc/init.d/rc: line 77: 424 Bus error $@
/etc/init.d/rc: line 77: 431 Bus error $@
/etc/init.d/rc: line 77: 435 Bus error $@
INIT: Entering runlevel: 2
Starting system log daemon: syslogd/etc/rc2.d/S10sysklogd: line 14:
445 Bus error chown root:adm /dev/xconsole
.
/etc/init.d/rc: line 77: 443 Bus error $@
Starting kernel log daemon: klogd.
/etc/init.d/rc: line 77: 451 Bus error $@
Zaptel telephony kernel driver: FATAL: Module ztdummy not found.
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
/etc/rc2.d/S15zaptel: line 120: 460 Bus error $DAEMON
$DAEMON_OPTS
/sbin/ztcfg failed. Check /etc/zaptel.confzaptel.
/etc/init.d/rc: line 77: 457 Bus error $@
/etc/init.d/rc: line 77: 464 Bus error $@
/etc/init.d/rc: line 77: 465 Bus error $@
* Not starting internet superserver: no services enabled.
/etc/init.d/rc: line 77: 467 Bus error $@
/etc/init.d/rc: line 77: 473 Bus error $@
/etc/rc2.d/S20ssh: line 7: 475 Bus error (
/usr/sbin/sshd -\? 2>&1 | grep -q OpenSSH ) 2>/dev/null
/etc/init.d/rc: line 77: 474 Bus error $@
Signal 10 (BUS) caught by ps (procps version 3.2.7).
Please send bug reports to <feedback at lists.sf.net> or
<albert at users.sf.net>
awk: cmd. line:1: fatal error: internal error
Starting Asterisk PBX:
Signal 10 (BUS) caught by ps (procps version 3.2.7).
Please send bug reports to <feedback at lists.sf.net> or
<albert at users.sf.net>
awk: cmd. line:1: fatal error: internal error
asterisk.
/etc/init.d/rc: line 77: 493 Bus error $@
Jan 1 01:00:38 WARNING[508]: manager.c:1743 init_manager: Unable to
bind socket: Cannot assign requested address
Starting periodic command scheduler: crond.
/etc/init.d/rc: line 77: 515 Bus error $@
Running local boot scripts (/etc/rc.local)/etc/rc2.d/S99rc.local: line
17: 527 Bus error /etc/rc.local
failed!
/etc/init.d/rc: line 77: 525 Bus error $@
/etc/init.d/rc: line 77: 533 Bus error $@
/etc/rc2.d/S99stop-bootlogd: line 17: 536 Bus error
/etc/init.d/bootlogd stop
/etc/init.d/rc: line 77: 535 Bus error $@
---------------------------------------------------------------------------------------
successful boot
---------------------------------------------------------------------------------------
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: ¤T 12¤ë 14 15:54:18 CST 2005 (root at localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes
Total memory used by CFE: 0x80800000 - 0x8089B590 (636304)
Initialized Data: 0x80831700 - 0x80833DE0 (9952)
BSS Area: 0x80833DE0 - 0x80835590 (6064)
Local Heap: 0x80835590 - 0x80899590 (409600)
Stack Area: 0x80899590 - 0x8089B590 (8192)
Text (code) segment: 0x80800000 - 0x80831700 (202496)
Boot area (physical): 0x0089C000 - 0x008DC000
Relocation Factor: I:00000000 - D:00000000
Device eth0: hwaddr 00-17-31-DC-05-70, ipaddr 192.168.1.1, mask
255.255.255.0
gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3740 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.19.2 (tch at tomek) (gcc version 4.1.2) #9 Tue Apr 3
21:30:54 CEST 2007
CPU revision is: 00029006
ssb: Sonics Silicon Backplane found on address 0x18000000
Determined physical RAM map:
memory: 02000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Built 1 zonelists. Total pages: 8128
Kernel command line: root=/dev/sda1 rootdelay=10 console=ttyS0,115200
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16
bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Synthesized TLB refill handler (19 instructions).
Synthesized TLB load handler fastpath (31 instructions).
Synthesized TLB store handler fastpath (31 instructions).
Synthesized TLB modify handler fastpath (30 instructions).
PID hash table entries: 128 (order: 7, 512 bytes)
Using 132.000 MHz high precision timer.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 29776k/32768k available (2117k kernel code, 2992k reserved,
326k data, 120k init, 0k highmem)
Mount-cache hash table entries: 512
Checking for 'wait' instruction... unavailable.
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: fixing up bridge
PCI: Fixing up device 0000:00:00.0
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
JFFS2 version 2.2. (NAND) (C) 2001-2006 Red Hat, Inc.
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 3) is a 16550A
b44.c:v1.01 (Jun 16, 2006)
eth0: Broadcom 10/100BaseT Ethernet 00:17:31:dc:05:70
eth1: Broadcom 10/100BaseT Ethernet 40:10:18:00:00:2d
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Physically mapped flash: CFI does not contain boot bank location.
Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x800000 at 0x1fc00000
bootloader size: 262144
Creating 4 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x007f0000 : "linux"
0x00120000-0x007f0000 : "rootfs"
0x007f0000-0x00800000 : "nvram"
PCI: Enabling device 0000:00:03.2 (0000 -> 0002)
PCI: Fixing up device 0000:00:03.2
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:03.2: irq 6, io mem 0x40000000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
USB Universal Host Controller Interface driver v3.0
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.0
uhci_hcd 0000:00:03.0: UHCI Host Controller
uhci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:03.0: irq 6, io base 0x00000100
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Enabling device 0000:00:03.1 (0000 -> 0001)
PCI: Fixing up device 0000:00:03.1
uhci_hcd 0000:00:03.1: UHCI Host Controller
uhci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:03.1: irq 6, io base 0x00000120
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-2: new high speed USB device using ehci_hcd and address 2
Initializing USB Mass Storage driver...
usb 1-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
ip_conntrack version 2.4 (256 buckets, 2048 max) - 240 bytes per conntrack
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb at candelatech.com>
All bugs added by David S. Miller <davem at redhat.com>
Waiting 10sec before mounting root device...
Time: MIPS clocksource has been installed.
scsi 0:0:0:0: Direct-Access TOSHIBA MK1016GAP U1.1 PQ: 0
ANSI: 0 CCS
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
SCSI device sda: 19640880 512-byte hdwr sectors (10056 MB)
sda: Write Protect is off
sda: assuming drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 120k freed
Algorithmics/MIPS FPU Emulator v1.5
INIT: version 2.86 booting
Starting the hotplug events dispatcher: udevd.
Synthesizing the initial hotplug events...done.
Waiting for /dev to be fully populated...ieee80211: 802.11
data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation
<jketreno at linux.intel.com>
bcm43xx driver
done.
Activating swap:.
Will now check root file system:fsck 1.40-WIP (14-Nov-2006)
[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a -C0 /dev/sda1
/dev/sda1: clean, 15866/1177344 files, 200094/2351152 blocks
.
EXT3 FS on sda1, internal journal
Setting the system clock..
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access
method.
System Clock set. Local time: Sat Jan 1 00:00:23 UTC 2000.
Cleaning up ifupdown....
Loading kernel module ieee80211_crypt.
Loading kernel module ieee80211softmac.
Loading kernel module ieee80211.
Loading kernel module bcm43xx.
Loading device-mapper support.
Will now check all file systems.
fsck 1.40-WIP (14-Nov-2006)
Checking all file systems.
Done checking file systems.
A log is being saved in /var/log/fsck/checkfs if that location is
writable.
Setting kernel variables...done.
Will now mount local filesystems:.
Will now activate swapfile swap:done.
Cleaning /tmp...done.
Cleaning /var/run...done.
Cleaning /var/lock...done.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
Added VLAN with VID == 1 to IF -:eth0:-
WARNING: VLAN 1 does not work with many switches,
consider another number if you have problems.
Setting up networking....
Configuring network interfaces...done.
Initializing random number generator...done.
INIT: Entering runlevel: 2
Starting system log daemon: syslogd.
Starting kernel log daemon: klogd.
Zaptel telephony kernel driver: FATAL: Module ztdummy not found.
Notice: Configuration file is /etc/zaptel.conf
line 0: Unable to open master device '/dev/zap/ctl'
1 error(s) detected
/sbin/ztcfg failed. Check /etc/zaptel.confzaptel.
* Not starting internet superserver: no services enabled.
Starting OpenBSD Secure Shell server: sshd.
Starting Asterisk PBX: asterisk.
Starting periodic command scheduler: crond.
Running local boot scripts (/etc/rc.local).
Debian GNU/Linux 4.0 asus-debian ttyS0
asus-debian login:
More information about the debian-non-standard
mailing list