[debian-non-standard] USB-Stick not active after flashing

[Thomas Ohms]

Am Donnerstag, den 26.06.2008, 21:14 +0200 schrieb Tomasz Chmielewski:
> Thomas Ohms schrieb:
> > Am Mittwoch, den 25.06.2008, 20:08 +0200 schrieb Tomasz Chmielewski:
> >> Thomas Ohms schrieb:
> >>
> >> (...)
> >>
> >>> As I said: I would answer "yes" here if at least I could get the
> >>> firmware on my router as mentioned in the HOWTO.
> >>> So could we start here?! Means my first problem is: when I try to upload
> >>> the firmware I always receive a timeout by tftp. How did you configure
> >>> your local network? What steps have you taken to get the firmware on the
> >>> router?
> >>>
> >>> Thanks very, very much for your patience and help!
> >> OK, so you're not even able to upload the firmware? You should write 
> >> more clearly ;) (or I should read more carefully).
> >>
> >> 1. Power off the device, press the reset button, power on the device, 
> >> release the reset button
> >> 2. On of the LEDs should blink
> >> 3. The device will have the address 192.168.1.1 - can you ping it? 
> >> Obviously, you need an address in the same network if your computer is 
> >> connected directly with a cable (IP like 192.168.1.2)
> >> 4. If you can ping it, you should be able to upload the firmware. I use:
> > 
> > I can ping the router, but not upload anything :(
> 
> firewall?
> 
> What tftp client do you use?
> 
> What does tcpdump say?
> 
> 
here's the tcpdump logfile


-------------- next part --------------
A non-text attachment was scrubbed...
Name: tcpdump.log
Type: text/x-log
Size: 1516 bytes
Desc: not available
URL: <http://lists.wpkg.org/pipermail/debian-non-standard/attachments/20080701/170f2796/attachment-0003.bin>