[sheepdog-users] Fwd: After upgrade sheep doesn't start

[Valerio Pachera]

Ok, so we have to strart from scratch.

I already saved my 3 testing vdi in qcow2 files, but I wanted to try
the snaphost procedure.
It didn't work well for me: it didn't save all vdi.

Reinstalled previous sheepdog verions

root at test004:/mnt/big# dog vdi list
  Name        Id    Size    Used  Shared    Creation time   VDI id  Copies  Tag
  node1        0   10 GB  3.7 GB  0.0 MB 2013-08-27 16:11   232f14
2
  node2        0   10 GB  2.4 GB  0.0 MB 2013-08-27 16:11   23342d
2
s wheezy_template     1   10 GB  1.8 GB  0.0 MB 2013-08-30 17:58
5ddf88     2
s wheezy_template     2   10 GB  1.0 GB 1008 MB 2013-08-30 18:02
5ddf89     2
s wheezy_template     3   10 GB  140 MB  1.9 GB 2013-08-30 18:05
5ddf8a     2
  wheezy_template     0   10 GB  152 MB  1.9 GB 2013-09-02 12:20
5ddf9c     2
  balance      0   10 GB  2.4 GB  0.0 MB 2013-08-27 16:11   98390b
2
c wheezy01     0   10 GB  152 MB  1.9 GB 2013-09-02 12:21   9c9542     2


root at test004:/mnt/big/cluster_snap/2013_09_03# dog cluster snapshot
save preupgrade .

stopped custer, removed data, re-installed latest master, format cluster -c 2

root at test004:/mnt/big/cluster_snap/2013_09_03# time dog cluster
snapshot load preupgrade .

# dog vdi list
  Name        Id    Size    Used  Shared    Creation time   VDI id  Copies  Tag
s wheezy_template     1   10 GB  1.8 GB  0.0 MB 2013-08-30 17:58
5ddf88     2
s wheezy_template     2   10 GB  1.0 GB 1008 MB 2013-08-30 18:02
5ddf89     2
s wheezy_template     3   10 GB  140 MB  1.9 GB 2013-08-30 18:05
5ddf8a     2
  wheezy_template     0   10 GB  0.0 MB  2.0 GB 2013-09-03 10:16   5ddf8b     2

Did I miss anything?
We might open a new tread for that.