I am in the process of getting a trivial (1-node) sheepdog running under
Ubuntu 11.04 x86_64.
I have the corosync package installed, copied corosync.conf.example to
corosync.conf and set a valid bindnetaddr. It appears to start - these
messages appear in /var/log/syslog
~~~~
Aug 16 20:31:37 x100 corosync[15772]: [MAIN ] Corosync Cluster Engine ('1.2.1'): started and ready to provide service.
Aug 16 20:31:37 x100 corosync[15772]: [MAIN ] Corosync built-in features: nss
Aug 16 20:31:37 x100 corosync[15772]: [MAIN ] Successfully read main configuration file '/etc/corosync/corosync.conf'.
Aug 16 20:31:37 x100 corosync[15772]: [TOTEM ] Initializing transport (UDP/IP).
Aug 16 20:31:37 x100 corosync[15772]: [TOTEM ] Initializing transmit/receive security: libtomcrypt SOBER128/SHA1HMAC (mode 0).
Aug 16 20:31:37 x100 corosync[15772]: [TOTEM ] The network interface [192.168.122.1] is now up.
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync extended virtual synchrony service
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync configuration service
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync cluster closed process group service v1.01
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync cluster config database access v1.01
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync profile loading service
Aug 16 20:31:37 x100 corosync[15772]: [SERV ] Service engine loaded: corosync cluster quorum service v0.1
Aug 16 20:31:37 x100 corosync[15772]: [MAIN ] Compatibility mode set to whitetank. Using V1 and V2 of the synchronization engine.
Aug 16 20:31:37 x100 corosync[15772]: [TOTEM ] A processor joined or left the membership and a new membership was formed.
Aug 16 20:31:37 x100 corosync[15772]: [MAIN ] Completed service synchronization, ready to provide service.
~~~~
However, when I try to run sheep, I get the following:
~~~~
$ sheep -f /var/tmp/sheep
sheep: jrnl_recover(2305) Openning the directory /var/tmp/sheep/journal/00000000/.
sheep: create_cluster(1709) Failed to initialize cpg, 100
sheep: create_cluster(1710) Is corosync running?
sheep: main(150) failed to create sheepdog cluster.
~~~~
And each time I do this, I get the following message in /var/log/syslog:
Aug 16 20:32:46 x100 corosync[15772]: [IPC ] Invalid IPC credentials.
This suggests to me some sort of authentication issue between sheep and
corosync.
The usage example at https://github.com/collie/sheepdog/wiki/Getting-Started
seems to show sheep being run as a regular user, not root. But I tried
running as root anyway, and it seemed to work this time:
~~~~
$ sudo sheep -f /var/tmp/sheep
sheep: jrnl_recover(2305) Openning the directory /var/tmp/sheep/journal/00000000/.
sheep: set_addr(1696) addr = 192.168.122.1, port = 7000
sheep: main(154) Sheepdog daemon (version 0.2.3) started
sheep: read_epoch(2099) failed to read epoch 0
~~~~
OK, so let's go with that for now (although I'd prefer not to run as root)
~~~~
$ collie cluster format --copies=2
$ collie node list
Idx - Host:Port Vnodes Zone
-----------------------------------------
* 0 - 192.168.122.1:7000 64 0
$ qemu-img create sheepdog:Test 2G
Formatting 'sheepdog:Test', fmt=raw size=2147483648
qemu-img: Failed to write the requested VDI, Test
qemu-img: sheepdog:Test: error while creating raw: Input/output error
~~~~
Hmm, that's not so good. The sheep process says:
~~~~
sheep: cluster_queue_request(266) 0x7f6c891f4010 84
sheep: attr(1928) use 'user_xattr' option?, user.sheepdog.copies
sheep: __sd_deliver_done(925) unknown message 2
sheep: cluster_queue_request(266) 0x10d3130 82
sheep: cluster_queue_request(266) 0x10d3130 11
sheep: do_lookup_vdi(236) looking for Test 4, ec9f05
sheep: add_vdi(333) we create a new vdi, 0 Test (4) 2147483648, vid: ec9f05, base 0, cur 0
sheep: add_vdi(337) qemu doesn't specify the copies... 2
sheep: store_queue_request_local(628) use 'user_xattr' option?
sheep: write_object(647) fail 80ec9f0500000000 6
sheep: __sd_deliver_done(925) unknown message 2
~~~~
Maybe I need to set copies=1 for a degraded cluster?
~~~~
$ collie cluster format --copies=1
$ collie node list
Idx - Host:Port Vnodes Zone
-----------------------------------------
* 0 - 192.168.122.1:7000 64 0
brian at x100:/etc/corosync$ qemu-img create sheepdog:Test 2G
Formatting 'sheepdog:Test', fmt=raw size=2147483648
qemu-img: Failed to write the requested VDI, Test
qemu-img: sheepdog:Test: error while creating raw: Input/output error
~~~~
Same result:
~~~~
sheep: cluster_queue_request(266) 0x10d3130 84
sheep: attr(1928) use 'user_xattr' option?, user.sheepdog.copies
sheep: __sd_deliver_done(925) unknown message 2
sheep: cluster_queue_request(266) 0x10d3130 82
sheep: cluster_queue_request(266) 0x10d3130 11
sheep: do_lookup_vdi(236) looking for Test 4, ec9f05
sheep: add_vdi(333) we create a new vdi, 0 Test (4) 2147483648, vid: ec9f05, base 0, cur 0
sheep: add_vdi(337) qemu doesn't specify the copies... 1
sheep: store_queue_request_local(628) use 'user_xattr' option?
sheep: write_object(647) fail 80ec9f0500000000 6
sheep: __sd_deliver_done(925) unknown message 2
~~~~
I notice the message about "user_xattr" option. However this filesystem
is ext4:
$ mount | grep "on / "
/dev/sda5 on / type ext4 (rw,errors=remount-ro,commit=0)
and the Getting-Started guide says that user_xattr is only needed for ext3.
However, let's try it anyway:
$ sudo mount -o remount,user_xattr /
OK, that seems to work! Sheep shows:
~~~~
sheep: cluster_queue_request(266) 0x10d3130 11
sheep: do_lookup_vdi(236) looking for Test 4, ec9f05
sheep: add_vdi(333) we create a new vdi, 0 Test (4) 2147483648, vid: ec9f05, base 0, cur 0
sheep: add_vdi(337) qemu doesn't specify the copies... 1
sheep: vdi_op_done(758) done 0 15507205
sheep: __sd_deliver_done(925) unknown message 2
~~~~
and I can boot with
$ qemu-system-x86_64 -cdrom /v/downloads/linux/ubuntu-10.04.3-server-amd64.iso sheepdog:Test
So it looks like I have a one-node cluster:
~~~~
# collie cluster info
Cluster status: running
Creation time Epoch Nodes
1970-01-01 01:00:00 1 [192.168.122.1:7000]
~~~~~
Anyway, my questions are:
1. Can I run sheep as a non-root user? If so, how?
2. Do I really need user_xattr even for ext4? (if so, the documentation
needs adjusting)
3. Can I ignore the cluster creation time of '1970-01-01 01:00:00' ?
4. What happens if you set --copies=N but the cluster degrades to
the point where it has fewer nodes than that? As far as I can see,
my one-node cluster with --copies=2 does actually work. Would the
data get copied when a new node is added?
One other point. Experimentation shows that "collie cluster format"
instantly destroys all existing vdis, with no confirmation - and it can be
run as a non-root user. Can I suggest some idiot-proofing is done on this?
e.g. if a cluster already exists then you need to add some extra parameter
to force deletion?
Thanks,
Brian.
|
|