Add a script that will create a target, add a device to
the target and define the initiator that can connect to it.
Signed-off-by: Erez Zilber <erezz at voltaire.com>
---
usr/iscsi/scripts/assign_lun | 127 ++++++++++++++++++++++++++++++++++++++++++
1 files changed, 127 insertions(+), 0 deletions(-)
create mode 100755 usr/iscsi/scripts/assign_lun
diff --git a/usr/iscsi/scripts/assign_lun b/usr/iscsi/scripts/assign_lun
new file mode 100755
index 0000000..0af0a25
--- /dev/null
+++ b/usr/iscsi/scripts/assign_lun
@@ -0,0 +1,127 @@
+# LUN assignment script for iSCSI
+#
+# Copyright (C) 2007 Erez Zilber <erezz at voltaire.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation, version 2 of the
+# License.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+# 02110-1301 USA
+
+#!/bin/bash
+
+verify_params()
+{
+ # Make sure that the device exists
+ if ! [ -b $dev ]; then
+ echo "$dev is not a device";
+ exit 1;
+ fi
+}
+
+find_vacant_tgt_id()
+{
+ id_list=$(tgtadm --lld iscsi --op show --mode target | grep Target | cut -d" " -f2 | sed s/://)
+
+ next_vacant_id=1
+
+ for id in $id_list; do
+ if (($id > $next_vacant_id)); then
+ break;
+ else
+ next_vacant_id=$((next_vacant_id+1))
+ fi
+ done
+
+ return $next_vacant_id
+}
+
+find_vacant_lun()
+{
+ tid=$1
+ tgt_found=0
+ next_vacant_lun=0
+ tmp_file=/tmp/target_list.txt
+
+ tgtadm --lld iscsi --op show --mode target > $tmp_file
+
+ while read line; do
+ # Check if we finished going over this target
+ if ((tgt_found == 1 && $(echo $line | grep -c "^Target") == 1)); then
+ break
+ fi
+
+ # Check if we found the requested target
+ if (($(echo $line | grep -c "Target $tid:") == 1)); then
+ tgt_found=1
+ continue
+ fi
+
+ if ((tgt_found == 1 && $(echo $line | grep -c "LUN:") == 1)); then
+ curr_lun=$(echo $line | cut -d" " -f2)
+ if (($curr_lun > $next_vacant_lun)); then
+ break
+ else
+ next_vacant_lun=$((next_vacant_lun+1))
+ fi
+ fi
+ done < $tmp_file
+
+ rm -f $tmp_file
+
+ if ((tgt_found == 0)); then
+ echo "Error: could not find a LUN for target $tid"
+ return -1
+ fi
+
+ return $next_vacant_lun
+}
+
+if [ $# -ne 3 ]; then
+ name=$(basename $0)
+ echo "usage: $name <dev> <initiator name> <initiator IP>";
+ echo "example: $name /dev/sdb1 noni 192.168.10.63";
+ exit 1;
+fi
+
+dev=$1
+initiator=$2
+initiator_ip=$3
+
+verify_params
+
+# Check if tgtd is running (we should have 2 daemons)
+tgtd_count=$(ps aux|grep -c tgtd)
+if [ $tgtd_count -ne 3 ]; then
+ echo "Starting tgtd"
+ tgtd
+fi
+
+tgt_name="iqn.2001-04.com.$(hostname -s)-$initiator"
+
+find_vacant_tgt_id
+tid=$?
+
+# Create the new target
+echo "Creating the new target"
+tgtadm --lld iscsi --op new --mode target --tid $tid -T $tgt_name
+
+find_vacant_lun $tid
+lun=$?
+
+# Add a logical unit to the target
+echo "Adding a logical unit to the target"
+tgtadm --lld iscsi --op new --mode logicalunit --tid $tid --lun $lun -b $dev
+
+# Accept only a specific initiator
+echo "Accepting connections only from $initiator_ip"
+tgtadm --lld iscsi --op bind --mode target --tid $tid -I $initiator_ip
--
1.5.3.7
|
|