On 10/26/2009 03:57 PM, Tomasz Chmielewski wrote: > Albert Pauw wrote: >> Attached my vtl script, this works when using an empty targets.conf >> file, >> and setting up the target afterwards using this script. > > So, does tgt-admin I sent you generate a proper config or not? > > No, it looks like it is ok, login into this target created this way looks ok, but trying to use the changer device gives problems: [root at orange tgt]# mtx -f /dev/changer status mtx: Request Sense: Long Report=yes mtx: Request Sense: Valid Residual=no mtx: Request Sense: Error Code=0 (Unknown?!) mtx: Request Sense: Sense Key=No Sense mtx: Request Sense: FileMark=no mtx: Request Sense: EOM=no mtx: Request Sense: ILI=no mtx: Request Sense: Additional Sense Code = 00 mtx: Request Sense: Additional Sense Qualifier = 00 mtx: Request Sense: BPV=no mtx: Request Sense: Error in CDB=no mtx: Request Sense: SKSV=no READ ELEMENT STATUS Command Failed Looking at it using wireshark I can see that the Login Command is generated every 17-18 seconds, even after the mtx command had failed. So there seems to be something weirdly configured this way, compared to the "manually" created device with a script. Albert -- To unsubscribe from this list: send the line "unsubscribe stgt" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html |