On 07/13/2012 07:08 PM, ronnie sahlberg wrote: > Hi, > > If you just want to create a tape drive with a tape loaded, these > commands should work : > > # create a blank tape > tgtimg --op new --device-type tape --barcode 12345 --size 100 --type > data --file /data/tape001.img > > > # create a target > tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.ronnie.test > > # create a SSC LUN for with the blank tape above loaded into the device > tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 -b > /data/tape001.img --device-type=tape > I get 'tgtadm: invalid request when trying to create the LU # tgtimg --op new --device-type tape --barcode 12345 --size 100 --type data --file /data/tape001.img blk_sz: 100, next 1152, 1152 Sizeof(mam): 1104, sizeof(h): 48 # tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.ronnie.test tgtadm: can't send the request to the tgt daemon, Transport endpoint is not connected At this, I did 'service tgtd restart' # tgtadm --lld iscsi --op new --mode target --tid 1 -T iqn.ronnie.test # tgtadm --lld iscsi --mode logicalunit --op new --tid 1 --lun 1 -b /data/tape001.img --device-type=tape tgtadm: invalid request # # tgtimg --help Usage: tgtimg [OPTION] Linux SCSI Target Framework Image File Utility, version 1.0.24 [root at rhel-storage-03 ~]# tgtadm --help Usage: tgtadm [OPTION] Linux SCSI Target Framework Administration Utility, version 1.0.24 This is all after a fresh reboot. Am I still missing something? Rob -- To unsubscribe from this list: send the line "unsubscribe stgt" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html |