[stgt] iSER over iWARP

Sushma R gsushma at gmail.com
Thu Oct 3 09:02:45 CEST 2013


Yes, that's the output. Entire output from beginning below.
Also, I'm not sure if it's required, but there are two NICs each on
the initiator and target systems - one Chelsio 10GbE RNIC and other
Broadcom 1GbE NIC.

Here's the entire output iscsid output from the beginning:
[root at lab189 ~]# /sbin/iscsid -f -d 127
iscsid: sysfs_init: sysfs_path='/sys'

iscsid: in ctldev_open
iscsid: created NETLINK_ISCSI socket...
iscsid: InitiatorName=iqn.1994-05.com.redhat:b1e11cac64bc
iscsid: InitiatorName=iqn.1994-05.com.redhat:b1e11cac64bc
iscsid: InitiatorAlias=lab189
iscsid: Max file limits 1024 4096

iscsid: found 10.196.86.101,3260

iscsid: Looking for config file /var/lib/iscsi/send_targets/10.196.86.101,3260

iscsid: Looking for config file
/var/lib/iscsi/send_targets/10.196.86.101,3260 c        onfig
st_config.
iscsid: updated 'discovery.startup', 'manual' => 'manual'
iscsid: updated 'discovery.type', 'sendtargets' => 'sendtargets'
iscsid: updated 'discovery.sendtargets.address', '' => '10.196.86.101'
iscsid: updated 'discovery.sendtargets.port', '0' => '3260'
iscsid: updated 'discovery.sendtargets.auth.authmethod', 'None' => 'None'
iscsid: updated 'discovery.sendtargets.timeo.login_timeout', '15' => '15'
iscsid: updated 'discovery.sendtargets.use_discoveryd', 'No' => 'No'
iscsid: updated 'discovery.sendtargets.discoveryd_poll_inval', '30' => '30'
iscsid: updated 'discovery.sendtargets.reopen_max', '5' => '5'
iscsid: updated 'discovery.sendtargets.timeo.auth_timeout', '45' => '45'
iscsid: updated 'discovery.sendtargets.timeo.active_timeout', '30' => '30'
iscsid: updated
'discovery.sendtargets.iscsi.MaxRecvDataSegmentLength', '32768'
 => '32768'
iscsid: st_start 10.196.86.101:3260 0
iscsid: Could not increase process priority: Success
iscsid: reaped pid 2734, reap_count now 0

iscsid: poll result 1
iscsid: mgmt_ipc_write_rsp: rsp to fd 5
iscsid: poll result 1
iscsid: mgmt_ipc_write_rsp: rsp to fd 5
iscsid: poll result 1
iscsid: mgmt_ipc_write_rsp: rsp to fd 5

On Wed, Oct 2, 2013 at 11:47 PM, Or Gerlitz <ogerlitz at mellanox.com> wrote:
> On 03/10/2013 04:51, Sushma R wrote:
>>
>> As suggested, I ran iscsid in the foreground and this is what I see
>> iscsid: poll result 1
>> iscsid: mgmt_ipc_write_rsp: rsp to fd 5
>> iscsid: poll result 1
>> iscsid: mgmt_ipc_write_rsp: rsp to fd 5
>> iscsid: poll result 1
>> iscsid: mgmt_ipc_write_rsp: rsp to fd 5
>
> did you run iscsid in the forground with debug flags set as I asked? "iscsid
> -f -d 127 &"
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html



More information about the stgt mailing list