# Empty targets configuration file -- please see the package
# documentation directory for an example.

include /etc/tgt/temp/*.conf

default-driver iscsi

<target iqn.2008-09.com.example:server.tape>
    allow-in-use yes
    <backing-store /root/tapes/notape1>
        lun 1
        device-type tape
        removable 1
        vendor_id "HP"
        product_id "LTO3 ULTRIUM"
        product_rev "0001"
        scsi_sn "HUM1A00001"
        scsi_id "HP LTO3 ULTRIUM"
    </backing-store>
    <backing-store /root/tapes/notape2>
        lun 2
        device-type tape
        removable 1
        vendor_id "HP"
        product_id "LTO3 ULTRIUM"
        product_rev "0001"
        scsi_sn "HUM1A00002"
        scsi_id "HP LTO3 ULTRIUM"
    </backing-store>
    <backing-store /root/tapes/notape3>
        lun 3
        device-type tape
        removable 1
        vendor_id "HP"
        product_id "LTO3 ULTRIUM"
        product_rev "0001"
        scsi_sn "HUM1A00003"
        scsi_id "HP LTO3 ULTRIUM"
    </backing-store>
    <backing-store /root/smc>
        lun 4
        device-type changer
        removable 0
        vendor_id "STK"
        product_id "L700"
        product_rev "0001"
        scsi_sn "123:456:789:000"
        # Dummy 'page 0'
        mode_page "0:0:0"
        # Page 0x02: Disconnect/Reconnect SPC-3
        mode_page "0x02:0:14:0x80:0x80:0:0xa:0:0:0:0:0:0:0:0:0:0"
        # Page 0x1a: Power Condition SPC-3
        mode_page "0x1a:0:18:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0"
        # Page 0x1c: Informational Exceptions Control SPC-3
        mode_page "0x1c:0:10:8:0:0:0:0:0:0:0:0:0"
        # Page 0x1d: Element Address Assignment SMC-3 7.3.4
        mode_page "0x1d:0:0x12:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0:0"
        # Page 0x1e: Transport Geometry Parameters SMC-3 7.3.5
        mode_page "0x1e:0:2:0:0"
        # Page 0x1f: Device Capabilities SMC-3 7.3.2
        # Page 0x1f/Subpage 0x41: Extended Device Capabilities SMC-3 7.3.3
        mode_page "0x1f:0:0x12:0x0f:7:0x0f:0x0f:0x0f:0x0f:0:0:0:0:0x0f:0x0f:0x0f:0x0f:0:0:0:0"
        # Type 1: Medium Transport Elements (robot arm/picker)
        params element_type=1,start_address=1,quantity=1,media_home=/root/tapes
        # Type 2: Storage Elements (tape slots)
        params element_type=2,start_address=1000,quantity=24,media_home=/root/tapes
        # Type 3: Import/Export Elements (CAP)
        params element_type=3,start_address=10,quantity=5,media_home=/root/tapes
        # Type 4: Add Data Transfer devices (drives)
        params element_type=4,start_address=500,quantity=3,media_home=/root/tapes
        params element_type=4,address=500,tid=1,lun=1
        params element_type=4,address=500,tid=1,lun=2
        params element_type=4,address=500,tid=1,lun=3
    </backing-store>
</target>
