[debian-non-standard] segmentation faults and bus errors - abandoned all hope
Przemyslaw Baran
przemyslaw.baran at gmail.com
Tue Feb 26 11:17:04 CET 2008
Don't forget some people on polish forums give advice how reactivate
asus box. You should read about connect pin9 to ground.
You should read this
http://openlinksys.info/forum/viewthread.php?forum_id=27&thread_id=3514
Dnia 25-02-2008, Pn o godzinie 23:51 +0100, Tomasz Orłowski pisze:
>
> Tomasz Orłowski napisał(a):
> > no risk no fun :)
> > So I'm beginning..... :)
> >
> > Thanks mate.
> >
> >
> >
>
> Shit, and I've bricked my box :'(
> It was so close to success :'(
> When I've compared our nvram settings there were only 3 differences:
>
> hardware_version=WL500gp-01-02-00-00
> hardware_version=WL500gH-01-00-00-00
>
> pmon_ver=CFE 3.91.23.0
> pmon_ver=CFE 3.91.7.0
>
> sdram_ncdl=0x10309
> sdram_ncdl=0x10407
>
> So off course I was trying to play with sdram_ncdl
> I set it first to 0x10407 as you have - without results
> Then to 0 as its recommended in many posts - without results
> I became nervous and changed sdram_init from 0x0009 to 0x000b as it was
> recommended in many posts too
> And it helped! No segmentation faults and bus errors after this trick
> but memory had been reduced to 16 MB
>
> I 've became really mad and started desperate tricks from
> http://wl500g.dyndns.org/sdram.html
> and finaly sdram_init=0x000a killed my box
>
> Now I don't see anything from serial console :'( Typical result of being
> greedy and stupid. It was so close......
>
> RIP
>
>
>
> -------------------------------------------------------------------------
> Easy Software Deployment >> http://wpkg.org
> _______________________________________________
> debian-non-standard mailing lists
> debian-non-standard at lists.wpkg.org
> http://lists.wpkg.org/mailman/listinfo/debian-non-standard
More information about the debian-non-standard
mailing list