[debian-non-standard] FSG3 debian installation

Tomasz Chmielewski mangoo at wpkg.org
Sat Aug 23 09:46:02 CEST 2008


Benoit Schneider schrieb:
> Hi everyone
> I realy want to install Debian on my freecom FSG3 but I think is not 
> booting on my 2 Go (120 Mo of swap for sdx1 and the rest for sdx2 in 
> ext3) USB key.
> In fitst when I'm flashing the kernel bye "dd 
> if=kernels/2.6.20/vmlinuz-fsg3-2.6.20-arm of=/dev/mtd2"
> I'm not receving the good result:
> /home/DataTravelerMini/root/deploy # dd 
> if=kernels/2.6.20/vmlinuz-fsg3-2.6.20-arm of=/dev/mtd2
> 2573+1 records in
> 2573+1 records out
> I don't know if it's very important or no?

What result do you get then?
Did you use "erase" first? It is very important to do so.


> But after trying to boot on my USB key I'm trying to ping and connect by 
> ssh but nothing else than a fail.

Did you use tune2fs on your /dev/sda2?

If you can't boot it any more, use FSG storage gateway assistant to 
upload original 4.x firmware and try again.


-- 
Tomasz Chmielewski
http://wpkg.org



More information about the debian-non-standard mailing list