[Stgt-devel] Inconsistency in usage of scsi_id and iscsi_sn?

[Albert Pauw]

I noticed something inconsistent (or so it seems).

If I define something like this:

tgtadm --lld iscsi --mode logicalunit --op update --tid 2 --lun 1 
--params 
vendor_id=MITSUMI,product_id=FD001,product_rev=0001,removable=1,sense_format=0
tgtadm --lld iscsi --mode logicalunit --op update --tid 2 --lun 1 --name 
scsi_id --value "CDROM ISO"
tgtadm --lld iscsi --mode logicalunit --op update --tid 2 --lun 1 --name 
scsi_sn --value "001"

and log into that target (using open-iscsi) I get in my dmesg:

scsi2 : iSCSI Initiator over TCP/IP
scsi 2:0:0:0: RAID              IET      Controller       0001 PQ: 0 ANSI: 5
scsi 2:0:0:0: Attached scsi generic sg2 type 12
scsi 2:0:0:1: CD-ROM            MITSUMI  FD001            0001 PQ: 0 ANSI: 5
sr1: scsi-1 drive
sr 2:0:0:1: Attached scsi CD-ROM sr1
sr 2:0:0:1: Attached scsi generic sg3 type 5

However, if I use the command:

tgtadm --lld iscsi --op show --mode target

it shows up as (part of it at least):

        LUN: 1
            Type: cd/dvd
            SCSI ID: CDROM ISO
            SCSI SN: 001
            Size: 628M
            Online: Yes
            Poweron/Reset: No
            Removable media: Yes

so the scsi_id and scsi_sn are not used on the initiator and never turn 
up, it's the vendor_id and product_id that show up.

Can somebody shed some light on this (seemingly) inconsistent behaviour?

Thanks,

Albert





-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://lists.berlios.de/pipermail/stgt-devel/attachments/20070807/94c6da39/attachment.html