[stgt] 0.9.11 released

[FUJITA Tomonori]

On Wed, 25 Nov 2009 16:21:11 +0100
Albert Pauw <albert.pauw at gmail.com> wrote:

> Here's what I did:
> 
> - pulled latest git version
> - added your patch
> - replaced tgt-admin with the latest from Tomasz
> - compiled and installed.
> 
> Made sure the proper /etc/tgt/targets.conf was setup.
> Started tgt (service iscsi-target start) logged in with open-iscsi, and 
> checked with tgt-admin -s:
> 
> Target 1: iqn.2008-09.com.example:server.tape
>      System information:
>          Driver: iscsi
>          State: ready
>      I_T nexus information:
>          I_T nexus: 1
>              Initiator: iqn.1994-05.com.fedora:d2b0d1c11efb
>              Connection: 0
>                  IP Address: 127.0.0.1
>      LUN information:
>          LUN: 0
>              Type: controller
>              SCSI ID: IET     00010000
>              SCSI SN: beaf10
>              Size: 0 MB
>              Online: Yes
>              Removable media: No
>              Backing store type: rdwr
>              Backing store path: None
>          LUN: 1
>              Type: tape
>              SCSI ID: HP LTO3 ULTRIUM
>              SCSI SN: HUM1A00001
>              Size: 0 MB
>              Online: Yes
>              Removable media: Yes
>              Backing store type: ssc
>              Backing store path: /root/btapes/notape1
>          LUN: 2
>              Type: tape
>              SCSI ID: HP LTO3 ULTRIUM
>              SCSI SN: HUM1A00002
>              Size: 0 MB
>              Online: Yes
>              Removable media: Yes
>              Backing store type: ssc
>              Backing store path: /root/btapes/notape2
>          LUN: 3
>              Type: tape
>              SCSI ID: HP LTO3 ULTRIUM
>              SCSI SN: HUM1A00003
>              Size: 0 MB
>              Online: Yes
>              Removable media: Yes
>              Backing store type: ssc
>              Backing store path: /root/btapes/notape3
>          LUN: 4
>              Type: changer
>              SCSI ID: IET     00010004
>              SCSI SN: 123:456:789:000
>              Size: 0 MB
>              Online: Yes
>              Removable media: Yes
>              Backing store type: rdwr
>              Backing store path: /root/smc
>      Account information:
>      ACL information:
>          ALL
> [root at orange tgt]# lsscsi
> [0:0:0:0]    disk    ATA      TOSHIBA MK6026GA PA20  /dev/sda
> [1:0:0:0]    cd/dvd  MATSHITA DVD-RAM UJ-841S  1.20  /dev/sr0
> [2:0:0:0]    storage IET      Controller       0001  -
> [2:0:0:1]    tape    HP       LTO3 ULTRIUM     0001  /dev/st0
> [2:0:0:2]    tape    HP       LTO3 ULTRIUM     0001  /dev/st1
> [2:0:0:3]    tape    HP       LTO3 ULTRIUM     0001  /dev/st2
> [2:0:0:4]    mediumx STK      L700             0001  /dev/sch0
> 
> All ok. Checked one tape drive:
> 
> 
> lsscsi:
> 
> [root at orange tgt]# mt -f /dev/nst0 status
> SCSI 2 tape drive:
> File number=0, block number=0, partition=0.
> Tape block size 0 bytes. Density code 0x0 (default).
> Soft error count since last status=0
> General status bits on (41010000):
>   BOT ONLINE IM_REP_EN
> 
> Also ok.
> 
> Now I used mtx -f /dev/changer status.
> 
> Result, same as seen previously, one tgtd dies off, iscsi tries to login 
> again and again.
> 
> What do you want me to check more?

Please send a log file including tgt's debug message (as you did in
2009/10/28).
--
To unsubscribe from this list: send the line "unsubscribe stgt" in
the body of a message to majordomo at vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html