[debian-non-standard] USB-Stick not active after flashing

[Tomasz Chmielewski]

Thomas Ohms schrieb:
> Am Mittwoch, den 25.06.2008, 20:08 +0200 schrieb Tomasz Chmielewski:
>> Thomas Ohms schrieb:
>>
>> (...)
>>
>>> As I said: I would answer "yes" here if at least I could get the
>>> firmware on my router as mentioned in the HOWTO.
>>> So could we start here?! Means my first problem is: when I try to upload
>>> the firmware I always receive a timeout by tftp. How did you configure
>>> your local network? What steps have you taken to get the firmware on the
>>> router?
>>>
>>> Thanks very, very much for your patience and help!
>> OK, so you're not even able to upload the firmware? You should write 
>> more clearly ;) (or I should read more carefully).
>>
>> 1. Power off the device, press the reset button, power on the device, 
>> release the reset button
>> 2. On of the LEDs should blink
>> 3. The device will have the address 192.168.1.1 - can you ping it? 
>> Obviously, you need an address in the same network if your computer is 
>> connected directly with a cable (IP like 192.168.1.2)
>> 4. If you can ping it, you should be able to upload the firmware. I use:
> 
> I can ping the router, but not upload anything :(

firewall?

What tftp client do you use?

What does tcpdump say?


-- 
Tomasz Chmielewski
http://wpkg.org