[iodine-users] Windows Client: connection succesful, can not ping server.

[Anne Kootstra]

Hi Robin, thanks for replying. In the past couple of days I've done some
investigation. 

As per usual I've started the server part on the DD-WRT router using putty.
When ping 10.0.0.1 on the router I get a reply, both in the same session as
well as a separate putty session . When I ping 10.0.0.1 on my Windows Vista
machine, without the Iodine client running, I get a reply from the ping.
When I start the client on the windows machine I'm no longer able to ping
10.0.0.1 anymore.

When I start the Iodine client I'm running a command line terminal with
administrator privileges, as it will not start otherwise. I see that the
network device is initialized and Windows reports it as being in use. 

While sending a ping I've used smsniff to check if the ping is actually sent
across the network device and this application doesn't register it. 

I'm currently at the end of my own knowledge in the matter. If some specific
information is helpful, please let me know and I will share it. So, if you
would like to see specific config files, let me know which ones and
how/where to obtain them.

Kind regards,

Anne

-----Oorspronkelijk bericht-----
Van: Robin. B 
Verzonden: vrijdag 5 augustus 2011 9:27
Aan: Anne Kootstra
Onderwerp: Re: [iodine-users] Windows Client: connection succesful, can not
ping server.

Hi, i could be wrong but i think u need to do some bit of bridging.
Maybe if possible first show us the configs and we will see where the
problem is.

On 8/1/11, Anne Kootstra <kootstra at hotmail.com> wrote:
> This is not a restricted network, the testing is performed while at home
> within my own network.
>
> In order to test whether closing down the regular network would work I've
> removed the default routing (route delete 0.0.0.0) and added one routing
> specific for the DNS server (route add DNSERVER 255.255.255.255) and one
> general routing to the new network connection (route add 0.0.0.0 MASK
> 0.0.0.0 10.0.0.2). However, this has not yielded the right result either.
>
> Kind regards,
>
> Anne
>
> -----Oorspronkelijk bericht-----
> Van: root at kryo.se [mailto:root at kryo.se] Namens Erik Ekman
> Verzonden: maandag 1 augustus 2011 10:56
> Aan: Anne
> CC: iodine-users at lists.wpkg.org
> Onderwerp: Re: [iodine-users] Windows Client: connection succesful, can
not
> ping server.
>
> On Sun, Jul 31, 2011 at 22:49, Anne <anne at aiml.info> wrote:
>> Presently I'm running Iodine server on my DD-WRT Linux router and
> connecting
>> to it using the windows client running on Windows Vista. The connection
is
>> made successfully, as far as I can tell. However, when I try to ping the
>> server (standard closing step in all the tutorials I could find) but
sadly
>> without the expected result.
>>
>
> Is this when you connect over unrestricted network or behind a
> paywall? If this is behind paywall, does it work on the open net?
> Can you provide tcpdump packet captures from both server and client?
>
> /Erik
>
> _______________________________________________
> iodine-users mailing lists
> iodine-users at lists.wpkg.org
> http://lists.wpkg.org/mailman/listinfo/iodine-users
>


-- 
**
networking . security . linux
server support & maintenance

+256 712 47 47 14
<iteq at iteqguru.com>robin at iteqpro.com