[iodine-users] how to use iodine after setup successfully

Suroto zhuroto at yahoo.co.uk
Tue Mar 1 03:42:37 CET 2011


Thank for your reply.

On Iodine Server is running  Ubuntu 9.10 . The server behind firewall / router ( IPCop ). I already add port forwarding for port 53 / UDP to IP address of iodine server.

Below is setting in the file /etc/default/iodine 
----------------------------------------------------------------------------------
# Default settings for iodine. This file is sourced from
# /etc/init.d/iodined
START_IODINED="true"
IODINED_ARGS="10.0.0.1 tunnel7.mooo.com"
IODINED_PASSWORD="mypasswd"
-------------------------------------------------------------------------------

On Client, running Ubuntu 10.04 . Connected to hotspot wifi , but I haven't access internet, because I am not a member  . Wireless Access Point  is firewalled by Mikrotik RouterOS.  Client get IP address = 192.168.2.61 , GW = 192.168.2.1 , DNS = 192.168.2.1 

Routing table of client after iodine client is running, as following :

Kernel IP routing table
Destination     Gateway         Genmask         Flags     Metric    Ref    Use Iface
10.0.0.0        0.0.0.0         255.255.255.224     U        0            0          0 dns0
192.168.2.0    0.0.0.0         255.255.255.0       U        1            0          0 eth0
0.0.0.0         192.168.2.1    0.0.0.0                UG       0            0          0 eth0
---------------------------------------------------------------------------------------------------------------------

The client can ping server ....  
Client's IP : 10.0.0.2  and Server's IP : 10.0.0.1
But client can't ping other computer (internet ). With other word, client can't ping Yahoo.com , etc ...

  


--- On Mon, 2/28/11, Robin. B <robin at iteqpro.com> wrote:

From: Robin. B <robin at iteqpro.com>
Subject: Re: [iodine-users] how to use iodine after setup successfully
To: "Suroto" <zhuroto at yahoo.co.uk>
Date: Monday, February 28, 2011, 1:23 PM

Can you please post the setting of the server, and can you check to see if your server is receiving packets.
Also let us know what OS are you running on the server.
Plus firewalls, etc
Any rules that you could have fed into the Server...

Let us know so that we know where to start from...
Cheers

On Mon, Feb 28, 2011 at 7:52 AM, Suroto <zhuroto at yahoo.co.uk> wrote:



Hi Guys,


I have already finished setup iodine server & client. iodine server is at office and iodine client is my laptop at home.

Both machine can ping through tunnel IP address ( IP of iodine server = 10.0.0.1  and client IP is 10.0.0.2 )


I try to browsing internet .. but, failed. no display page.

how to use iodine after setup & configuration successfully ?.
 what should I do to access internet ?


thank you ..
zhuro



      




      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wpkg.org/pipermail/iodine-users/attachments/20110301/231c6c63/attachment-0002.html>


More information about the iodine-users mailing list