[iodine-users] Iodine set up help | Ubuntu Server - MacBook Pro Client

Dmitry Shyshkin dmitry.shyshkin at gmail.com
Mon May 16 11:53:27 CEST 2011


What to do next is depend on what you want from iodine tunnel.
Your server should be already accessed trough iodine tunnel: try to 
ping/telnet/ssh 10.0.0.1.

Also iodined points to local address (dig A ns.iodine.dnstunnel.Co.CC => 
192.168.0.101). Add '-n 213.123.69.144'  to iodined options. I don't 
think that it is important (you have already connected the client) but 
sometimes it may be.

Regards,
Dmitry Shyshkin

On 05/16/2011 12:28 PM, Chris Parker wrote:
> As this is my first email, first of all hello everyone, hope you are 
> all well.
>
> Now to the problem at hand. I am running an Ubuntu Server behind a 
> Netgear WG384GT router and am currently connecting via a MacBook Pro 
> client. I have iodine installed and working on both (I think) and have 
> been able to make a successful connection from client to server.
>
> macbook-pro:bin ecri2$ sudo ./iodine -f -P xxx iodine.dnstunnel.co.cc 
> <http://iodine.dnstunnel.co.cc>
> Password:
> Opened /dev/tun0
> Opened UDP socket
> Sending DNS queries for iodine.dnstunnel.co.cc 
> <http://iodine.dnstunnel.co.cc> to 81.142.204.118
> Autodetecting DNS query type (use -T to override).
> Using DNS type NULL queries
> Version ok, both using protocol v 0x00000502. You are user #0
> Setting IP of tun0 to 10.0.0.2
> Adding route 10.0.0.2/27 <http://10.0.0.2/27> to 10.0.0.2
> add net 10.0.0.2 <http://10.0.0.2>: gateway 10.0.0.2
> Setting MTU of tun0 to 1130
> Server tunnel IP is 10.0.0.1
> Testing raw UDP data to the server (skip with -r)
> Server is at 192.168.0.101, trying raw login: ....failed
> iodine: Got FORMERR as reply: server does not understand our request
> DNS relay does not support EDNS0 extension
> Switching upstream to codec Base128
> Server switched upstream to codec Base128
> No alternative downstream codec available, using default (Raw)
> Switching to lazy mode for low-latency
> Server switched to lazy mode
> Autoprobing max downstream fragment size... (skip with -m fragsize)
> ...768 not ok.. ...384 not ok.. 192 ok.. ...288 not ok.. ...240 not 
> ok.. 216 ok.. 228 ok.. ...234 not ok.. ...231 not ok.. ...230 not ok.. 
> will use 228-2=226
> Setting downstream fragment size to max 226...
> Connection setup complete, transmitting data
>
> So assuming that that is OK, what I need to know is what I have to do 
> next. I am guessing that I need to make the client send its data via 
> this tunnel, but I am confused and despite hunting the web I have been 
> unable to answer my question thus far.
>
> I am also keen to see whether my domains and DNS settings are correct 
> and can explain those.
> I have a domain set up as follows;
>
>     Domain : dnstunnel.Co.CC <http://dnstunnel.Co.CC>
>     Expires on : 2012-05-13
>     Service Type : Name server (DNS)
>     Name server : freedns1.registrar-servers.com
>     <http://freedns1.registrar-servers.com>
>     freedns2.registrar-servers.com <http://freedns2.registrar-servers.com>
>     freedns3.registrar-servers.com
>     <http://freedns3.registrar-servers.com>
>
>
> And then at namescheap (provider of the above NS) I have;
> Domain: dnstunnel.co.cc <http://dnstunnel.co.cc>
> HOST NAME IP ADDRESS/ URL  RECORD TYPE MX PREF TTL
> @                                  n/a
> www                                  n/a
> SUB-DOMAIN SETTINGS
> tunnel               213..123..69.144         A address n/a
> iodine tunnel.dnstunnel.co.cc <http://tunnel.dnstunnel.co.cc> NS 
> recordn/a
>
> Please help!
>
>
> _______________________________________________
> iodine-users mailing lists
> iodine-users at lists.wpkg.org
> http://lists.wpkg.org/mailman/listinfo/iodine-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wpkg.org/pipermail/iodine-users/attachments/20110516/0c57076a/attachment-0003.html>


More information about the iodine-users mailing list