[iodine-users] Iodine set up help | Ubuntu Server - MacBook Pro Client

Chris Parker 25zerotwo at gmail.com
Mon May 16 12:33:35 CEST 2011


So as for my wants, I wish to be able to pipe all my browser traffic through
this tunnel and at the moment I believe that I am actually connecting via
the 'external' internet connection I have.

dig A ns.iodine etc done and results in.

macbook-pro:~ ecrime2$ dig A ns.iodine.dnstunnel.co.cc => 192.168.0.101
macbook-pro:~ ecrime2$ dig A ns.iodine.dnstunnel.co.cc

; <<>> DiG 9.6.0-APPLE-P2 <<>> A ns.iodine.dnstunnel.co.cc
;; global options: +cmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 6301
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 0, ADDITIONAL: 0

;; QUESTION SECTION:
;ns.iodine.dnstunnel.co.cc. IN A

;; ANSWER SECTION:
ns.iodine.dnstunnel.co.cc. 3456 IN A 192.168.0.101

;; Query time: 83 msec
;; SERVER: 81.142.204.118#53(81.142.204.118)
;; WHEN: Mon May 16 11:00:35 2011
;; MSG SIZE  rcvd: 59

Any helpful suggestions / guidance?

Chris

On 16 May 2011 10:53, Dmitry Shyshkin <dmitry.shyshkin at gmail.com> wrote:

>  What to do next is depend on what you want from iodine tunnel.
> Your server should be already accessed trough iodine tunnel: try to
> ping/telnet/ssh 10.0.0.1.
>
> Also iodined points to local address (dig A ns.iodine.dnstunnel.Co.CC =>
> 192.168.0.101). Add '-n 213.123.69.144'  to iodined options. I don't think
> that it is important (you have already connected the client) but sometimes
> it may be.
>
> Regards,
> Dmitry Shyshkin
>
>
> On 05/16/2011 12:28 PM, Chris Parker wrote:
>
> As this is my first email, first of all hello everyone, hope you are all
> well.
>
>  Now to the problem at hand. I am running an Ubuntu Server behind a
> Netgear WG384GT router and am currently connecting via a MacBook Pro client.
> I have iodine installed and working on both (I think) and have been able to
> make a successful connection from client to server.
>
>  macbook-pro:bin ecri2$ sudo ./iodine -f -P xxx iodine.dnstunnel.co.cc
> Password:
> Opened /dev/tun0
> Opened UDP socket
>  Sending DNS queries for iodine.dnstunnel.co.cc to 81.142.204.118
> Autodetecting DNS query type (use -T to override).
> Using DNS type NULL queries
> Version ok, both using protocol v 0x00000502. You are user #0
> Setting IP of tun0 to 10.0.0.2
> Adding route 10.0.0.2/27 to 10.0.0.2
> add net 10.0.0.2: gateway 10.0.0.2
> Setting MTU of tun0 to 1130
> Server tunnel IP is 10.0.0.1
> Testing raw UDP data to the server (skip with -r)
> Server is at 192.168.0.101, trying raw login: ....failed
> iodine: Got FORMERR as reply: server does not understand our request
> DNS relay does not support EDNS0 extension
> Switching upstream to codec Base128
> Server switched upstream to codec Base128
> No alternative downstream codec available, using default (Raw)
> Switching to lazy mode for low-latency
> Server switched to lazy mode
> Autoprobing max downstream fragment size... (skip with -m fragsize)
> ...768 not ok.. ...384 not ok.. 192 ok.. ...288 not ok.. ...240 not ok..
> 216 ok.. 228 ok.. ...234 not ok.. ...231 not ok.. ...230 not ok.. will use
> 228-2=226
> Setting downstream fragment size to max 226...
> Connection setup complete, transmitting data
>
>  So assuming that that is OK, what I need to know is what I have to do
> next. I am guessing that I need to make the client send its data via this
> tunnel, but I am confused and despite hunting the web I have been unable to
> answer my question thus far.
>
>  I am also keen to see whether my domains and DNS settings are correct and
> can explain those.
> I have a domain set up as follows;
>
>  Domain : dnstunnel.Co.CC
> Expires on : 2012-05-13
>  Service Type : Name server (DNS)
>  Name server : freedns1.registrar-servers.com
>  freedns2.registrar-servers.com
>  freedns3.registrar-servers.com
>
>
>  And then at namescheap (provider of the above NS) I have;
> Domain: dnstunnel.co.cc
>  HOST NAME IP ADDRESS/ URL  RECORD TYPE MX PREF TTL
>    @                                    n/a
>    www                                    n/a
>    SUB-DOMAIN SETTINGS
>   tunnel               213..123..69.144         A address   n/a
>   iodine               tunnel.dnstunnel.co.cc NS record   n/a
>
>  Please help!
>
>
> _______________________________________________
> iodine-users mailing listsiodine-users at lists.wpkg.orghttp://lists.wpkg.org/mailman/listinfo/iodine-users
>
>
>
> _______________________________________________
> iodine-users mailing lists
> iodine-users at lists.wpkg.org
> http://lists.wpkg.org/mailman/listinfo/iodine-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wpkg.org/pipermail/iodine-users/attachments/20110516/904f6a5f/attachment-0003.html>


More information about the iodine-users mailing list