[wpkg-users] WPKG(GP) under Windows 10 Pro (1511)

Ingo Arndt arndt.i at sps-berlin.de
Wed Jul 6 11:15:19 CEST 2016


I have updated to Windows 10 Pro 1511 and WPKG-GP is still working fine 
on boot.

For my machines managed by wpkg-gp I have a gpo with the settings 
(sry..german & html):

Administrative Vorlagen
Richtlinie 	Einstellung 	Kommentar
Aktion für Standbyschalter auswählen (Netzbetrieb) 	Aktiviert 	
Aktion für Standbyschalter 	Keine Aktion durchführen

Richtlinie 	Einstellung 	Kommentar
Netzschalteraktion auswählen (Netzbetrieb) 	Aktiviert 	
Netzschalteraktion 	Herunterfahren

Richtlinie 	Einstellung 	Kommentar
Enabling WPKG-GP Software Installation 	Aktiviert 	
WPKG command path 	cscript \\<myserverip>\wpkg\wpkg.js /synchronize 
/quiet /sendStatus
Disable 	No

Richtlinie 	Einstellung 	Kommentar
Wpkg-GP Logging settings 	Aktiviert 	
WPKG-gp Verbosity 	1

Richtlinie 	Einstellung 	Kommentar
Wpkg-GP Misc Settings 	Aktiviert 	
Maximum consecutive Reboots 	4
WPKG-gp Reboot Policy 	Force
Allow execution by non-admins 	Yes
Allow execution by normal users 	Yes
Show an activity indicator 	Yes

Richtlinie 	Einstellung 	Kommentar
Wpkg-GP Network Connection Settings 	Aktiviert 	
Wpkg-GP Network Username 	wpkg
Wpkg-GP Network Password 	<mywpkguserpassword>

Richtlinie 	Einstellung 	Kommentar
Äußerst detaillierte Statusmeldungen anzeigen 	Aktiviert

Some of these settings are overridden by the local Wpkg-gp.ini file:

TestConnectionHost = <myserverip>

SOFTWARE = \\<myserverip>\wpkg


Am 05.07.2016 um 15:51 schrieb Ingo Arndt:
> Hi,
> oh I just discovered that my system is stuck on Build 10240.
> I'll update and report back if wpkg-gp still works for me afterwards.
> Am 30.06.2016 um 16:22 schrieb Nils Thiele:
>> Hi
>> I just tried 0.17 again and atleast pipeclient is working but it still
>> wont execute at system start.
>> Fastboot is definatly disabled and even if not it should still work for
>> reboots but no luck.
>> Which version of windows 10 are you using?
>> Any other ideas what i could try?
>> Am 30.06.2016 um 16:00 schrieb Ingo Arndt:
>>> Hi,
>>> wpkg-gp (wpkg-gp-0.17_x64.exe) is working fine for me with windows 10
>>> using GPO.
>>> I had to disable fastboot to get wpkg correctly executed when the
>>> system starts.
>>> Without disabled fastboot it only runs on reboot.
>>> Am 30.06.2016 um 15:51 schrieb Nils Thiele:
>>>> Hi,
>>>> We are still using mainly windows 7 clients and a few 8.1 in our
>>>> organisation but sooner or later there will be some windows 10 ones.
>>>> I got a new test system with windows 10 to see if our software setup is
>>>> working correctly and it seems that wpkg-gp isnt working anymore on
>>>> windows 10, atleast the latest built (1511).
>>>> Install went fine and i even tried the latest beta release (0.18) but it
>>>> wont launch wpkg throuhg lgpo at bootup and there is no error in the
>>>> windows logs. Trying to execute wpkg manually through Pipeclient doesnt
>>>> work either, even tho the wpkg control service is running.
>>>> Anyone else experiencing this problem? Any other solution to get this
>>>> working at boot up?
>>>> Thanks!
>>>> Greetings,
>>>> Nils
> ---------------------------------
> wpkg-users mailing list archives >> http://lists.wpkg.org/pipermail/wpkg-users/
> _______________________________________________
> wpkg-users mailing list
> wpkg-users at lists.wpkg.org
> https://lists.wpkg.org/mailman/listinfo/wpkg-users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.wpkg.org/pipermail/wpkg-users/attachments/20160706/acbd5888/attachment-0001.html>

More information about the wpkg-users mailing list