October 2013 Archives by author
Starting: Tue Oct 1 07:53:02 CEST 2013
Ending: Thu Oct 31 14:36:04 CET 2013
Messages: 135
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] [PATCH] Enhance the iser readme
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] iSER over iWARP
Or Gerlitz
- [stgt] 1.0.40 released
Or Gerlitz
- [stgt] [PATCH RFC] save reservations through power loss
Alexander Gordeev
- [stgt] [PATCH 0/2] Small build issues
Andy Grover
- [stgt] [PATCH 1/2] Fix redefinition of _GNU_SOURCE
Andy Grover
- [stgt] [PATCH 2/2] Fix make install when no modules
Andy Grover
- [stgt] [PATCH] De-modularize aio
Andy Grover
- [stgt] backing-store options
Andy Grover
- [stgt] backing-store options
Boaz Harrosh
- [stgt] backing-store options
Boaz Harrosh
- [stgt] backing-store options
Boaz Harrosh
- [stgt] backing-store options
Boaz Harrosh
- [stgt] backing-store options
Boaz Harrosh
- [stgt] Answer back
Lee Hyuk
- [stgt] [PATCH] bs_sheepdog.c: fix pthread rwlock leak in sd_io()
Ryusuke Konishi
- [stgt] [PATCH] bs_sheepdog.c: fix memory leak issues in sd_open()
Ryusuke Konishi
- [stgt] [PATCH] bs_sheepdog.c: fix error handling issue in bs_sheepdog_request()
Ryusuke Konishi
- [stgt] [PATCH] usr/Makefile: fix typo in bs_aio so filename
Dan Mick
- [stgt] backing-store options
Dan Mick
- [stgt] backing-store options
Dan Mick
- [stgt] backing-store options
Dan Mick
- [stgt] [PATCH] De-modularize aio
Dan Mick
- [stgt] backing-store options
Dan Mick
- [stgt] [PATCH] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
Dan Mick
- [stgt] [PATCH 0/2] bs_rbd: unlimit images, keep cluster conn per image
Dan Mick
- [stgt] [PATCH 1/2] bs_rbd.c: store active_rbd info in addition to struct, scsi_lu
Dan Mick
- [stgt] [PATCH 2/2] bs_rbd.c: carry cluster connection along with rbd/lu
Dan Mick
- [stgt] backing-store options
Dan Mick
- [stgt] [PATCH] Allow backends to specify which opcodes they support
Dan Mick
- [stgt] [PATCH] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
Dan Mick
- [stgt] [PATCH 0/2] bs_rbd: unlimit images, keep cluster conn per image
Dan Mick
- [stgt] [PATCH] Allow backends to specify which opcodes they support
Dan Mick
- [stgt] [PATCH v2 0/2] bs_rbd: unlimit images, keep cluster conn per image
Dan Mick
- [stgt] [PATCH v2 1/2] bs_rbd.c: store active_rbd info in addition to struct scsi_lu
Dan Mick
- [stgt] [PATCH v2 2/2] bs_rbd.c: carry cluster connection along with rbd/lu
Dan Mick
- [stgt] [PATCH] tgt-admin: avoid in-use and backing_store existence tests for rbd
Dan Mick
- [stgt] [PATCH] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
Dan Mick
- [stgt] [PATCH] add --bsopts flag, pass to bs_init()
Dan Mick
- [stgt] [PATCH] Add bsopts flag
Dan Mick
- [stgt] [PATCH] Allow backends to specify which opcodes they support
Dan Mick
- [stgt] [PATCH v2] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
Dan Mick
- [stgt] [PATCH] tgt-admin: avoid in-use and backing_store existence tests for rbd
Dan Mick
- [stgt] [PATCH v2] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
Dan Mick
- [stgt] [PATCH 0/3] Several fixes for tgt-admin and rbd modifications
Dan Mick
- [stgt] [PATCH 1/3] tgt-admin: avoid zsh-specific syntax in system() call
Dan Mick
- [stgt] [PATCH 2/3] tgt-admin: abort check_device() early if -e returns false
Dan Mick
- [stgt] [PATCH 3/3] tgt-admin: avoid in-use and backing_store existence tests for rbd
Dan Mick
- [stgt] [PATCH] tgt-admin: avoid in-use and backing_store existence tests for rbd
Dan Mick
- [stgt] [PATCH] add --bsopts flag, pass to bs_init()
Dan Mick
- [stgt] [PATCH] add --bsopts flag, pass to bs_init()
Dan Mick
- [stgt] [PATCH v2] add --bsopts flag, pass to bs_init()
Dan Mick
- [stgt] [PATCH] Add bsopts flag
Dan Mick
- [stgt] [PATCH] bs_rbd.c: accept and parse bsopts
Dan Mick
- [stgt] [PATCH] README.rbd: add documentation for the rbd --bsopts parameters
Dan Mick
- [stgt] tgtd regression: new NAA descriptor breaks multipathd
Eric Millbrandt
- [stgt] [PATCH RFC] add support of sheepdog backing store
Hitoshi Mitake
- [stgt] [PATCH 0/3] various enhancements of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH 1/3] bs_sheepdog.c: partial update of inode object for optimizing COW
Hitoshi Mitake
- [stgt] [PATCH 2/3] bs_sheepdog.c: use multithread for scsi command submission
Hitoshi Mitake
- [stgt] [PATCH 3/3] bs_sheepdog.c: support reconnection for updating sheepdog
Hitoshi Mitake
- [stgt] [PATCH] bs_sheepdog.c: support various VDI options in --backing-store option
Hitoshi Mitake
- [stgt] [PATCH 0/2] improvemenets of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH 1/2] bs_sheepdog.c: mock the behavior of QEMU's sheepdog driver in a correct manner
Hitoshi Mitake
- [stgt] [PATCH 2/2] bs_sheepdog.c: fix segmentation fault caused by deleting logical unit
Hitoshi Mitake
- [stgt] [PATCH 0/2] improvemenets of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH v2 0/3] various improvements of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH v2 1/3] bs_sheepdog.c: mock the behavior of QEMU's sheepdog driver in a correct manner
Hitoshi Mitake
- [stgt] [PATCH v2 2/3] bs_sheepdog.c: fix segmentation fault caused by deleting logical unit
Hitoshi Mitake
- [stgt] [PATCH v2 3/3] bs_sheepdog.c: test connection when new logical unit is created
Hitoshi Mitake
- [stgt] [sheepdog] [PATCH v2 0/3] various improvements of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH v3 0/3] various improvements of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH v3 1/3] bs_sheepdog.c: mock the behavior of QEMU's sheepdog driver in a correct manner
Hitoshi Mitake
- [stgt] [PATCH v3 2/3] bs_sheepdog.c: fix segmentation fault caused by deleting logical unit
Hitoshi Mitake
- [stgt] [PATCH v3 3/3] bs_sheepdog.c: test connection when new logical unit is created
Hitoshi Mitake
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
Hitoshi Mitake
- [stgt] [PATCH] add --bsopts flag, pass to bs_init()
Hitoshi Mitake
- [stgt] [sheepdog] [PATCH v3 0/3] various improvements of bs_sheepdog.c
Hitoshi Mitake
- [stgt] [PATCH] tgtd: protect socket for management IPC with lockf(3)
Hitoshi Mitake
- [stgt] [PATCH] trivial: support cscope in Makefile and gitignore
Hitoshi Mitake
- [stgt] [PATCH] tgtd: protect socket for management IPC with lockf(3)
Hitoshi Mitake
- [stgt] [sheepdog] [PATCH] bs_sheepdog.c: fix pthread rwlock leak in sd_io()
Hitoshi Mitake
- [stgt] [sheepdog] [PATCH] bs_sheepdog.c: fix memory leak issues in sd_open()
Hitoshi Mitake
- [stgt] Accidental iSCSI Targets Deleted
John P. Mitchell
- [stgt] iSER over iWARP
Sushma R
- [stgt] iSER over iWARP
Sushma R
- [stgt] iSER over iWARP
Sushma R
- [stgt] iSER over iWARP
Sushma R
- [stgt] iSER over iWARP
Sushma R
- [stgt] [RFC] Allow backends to specify which opcodes they support
Ronnie Sahlberg
- [stgt] [PATCH] Add an optional supported-opcode-array to the backingstore template
Ronnie Sahlberg
- [stgt] [PATCH] Allow backends to specify which opcodes they support
Ronnie Sahlberg
- [stgt] [PATCH] Add an optional supported-opcode-array to the backingstore template
Ronnie Sahlberg
- [stgt] [PATCH] Allow backends to specify which opcodes they support V2
Ronnie Sahlberg
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
Ronnie Sahlberg
- [stgt] iSER over iWARP
Hiroyuki Sato
- [stgt] iSER over iWARP
Hiroyuki Sato
- [stgt] LUN stats
David Seira
- [stgt] iSER over iWARP
Sushma
- [stgt] [PATCH] Enhance the iser readme
FUJITA Tomonori
- [stgt] [PATCH RFC] add support of sheepdog backing store
FUJITA Tomonori
- [stgt] 1.0.40 released
FUJITA Tomonori
- [stgt] [PATCH] usr/Makefile: fix typo in bs_aio so filename
FUJITA Tomonori
- [stgt] [PATCH 0/3] various enhancements of bs_sheepdog.c
FUJITA Tomonori
- [stgt] [PATCH 0/2] Small build issues
FUJITA Tomonori
- [stgt] 1.0.40 released
FUJITA Tomonori
- [stgt] [PATCH 0/2] bs_rbd: unlimit images, keep cluster conn per image
FUJITA Tomonori
- [stgt] [PATCH] De-modularize aio
FUJITA Tomonori
- [stgt] [PATCH] bs_sheepdog.c: support various VDI options in --backing-store option
FUJITA Tomonori
- [stgt] [PATCH] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
FUJITA Tomonori
- [stgt] [PATCH v2 0/2] bs_rbd: unlimit images, keep cluster conn per image
FUJITA Tomonori
- [stgt] [PATCH] tgt-admin: avoid in-use and backing_store existence tests for rbd
FUJITA Tomonori
- [stgt] [PATCH v2] bs_rbd.c: pass cluster, not &cluster, to rados_shutdown()
FUJITA Tomonori
- [stgt] [PATCH v3 0/3] various improvements of bs_sheepdog.c
FUJITA Tomonori
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
FUJITA Tomonori
- [stgt] [PATCH 0/3] Several fixes for tgt-admin and rbd modifications
FUJITA Tomonori
- [stgt] [PATCH] add --bsopts flag, pass to bs_init()
FUJITA Tomonori
- [stgt] [PATCH] Add bsopts flag
FUJITA Tomonori
- [stgt] [PATCH] bs_rbd.c: accept and parse bsopts
FUJITA Tomonori
- [stgt] [PATCH] README.rbd: add documentation for the rbd --bsopts parameters
FUJITA Tomonori
- [stgt] Accidental iSCSI Targets Deleted
jpmitchell at alaska.edu
- [stgt] backing-store options
ronnie sahlberg
- [stgt] 1.0.40 released
ronnie sahlberg
- [stgt] [PATCH] Allow backends to specify which opcodes they support
ronnie sahlberg
- [stgt] [PATCH] Allow backends to specify which opcodes they support
ronnie sahlberg
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
ronnie sahlberg
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
ronnie sahlberg
- [stgt] [PATCH] Add an array that describes which opcodes are supported by the RDWR and SHEEPDOG backends.
ronnie sahlberg
Last message date:
Thu Oct 31 14:36:04 CET 2013
Archived on: Fri May 15 07:03:30 CEST 2015
This archive was generated by
Pipermail 0.09 (Mailman edition).