October 2008 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Wed Oct 1 13:32:25 CEST 2008
Ending: Fri Oct 31 05:20:44 CET 2008
Messages: 227

• [stgt] [PATCH] dynamically link libibverbs and librdma   FUJITA Tomonori
  • [stgt] [PATCH 0/2] dynamically link libibverbs and librdma   Doron Shoham
    • [stgt] [PATCH 1/2] rename iscsi_rdma.c to libtgt_rdma.c   Doron Shoham
    • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Doron Shoham
      • [stgt] SPAM: [PATCH 2/2] dynamically link libibverbs and librdma   Pete Wyckoff
      • [stgt] SPAM: [PATCH 2/2] dynamically link libibverbs and librdma   FUJITA Tomonori
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Doron Shoham
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Pete Wyckoff
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Doron Shoham
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Pete Wyckoff
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   Doron Shoham
      • [stgt] [PATCH 2/2] dynamically link libibverbs and librdma   FUJITA Tomonori
• [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   FUJITA Tomonori
  • [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   Mark Harvey
    • [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   FUJITA Tomonori
      • [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   Mark Harvey
      • [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   FUJITA Tomonori
      • [stgt] [PATCH 0/2] RFC - Double-linked list backing store.   Mark Harvey
• [stgt] [PATCH 1/2] tgt-admin: allow "lun" to be specified per device   Tomasz Chmielewski
  • [stgt] [PATCH 1/2] tgt-admin: allow "lun" to be specified per device   FUJITA Tomonori
• [stgt] [PATCH 2/2] tgt-admin: document lun usage in targets.conf   Tomasz Chmielewski
• [stgt] [PATCH] log.c: add error messages when trying to allocate shared memory   Doron Shoham
  • [stgt] [PATCH] log.c: add error messages when trying to allocate shared memory   FUJITA Tomonori
• [stgt] [PATCH] null backing store   Alexander Nezhinsky
  • [stgt] [PATCH] null backing store   FUJITA Tomonori
    • [stgt] [PATCH] null backing store   Alexander Nezhinsky
      • [stgt] [PATCH] null backing store   FUJITA Tomonori
      • [stgt] [PATCH] null backing store   FUJITA Tomonori
      • [stgt] [PATCH] null backing store   Alexander Nezhinsky
      • [stgt] [PATCH] null backing store   FUJITA Tomonori
• [stgt] sg-based backing store   Alexander Nezhinsky
  • [stgt] sg-based backing store   FUJITA Tomonori
    • [stgt] sg-based backing store   Alexander Nezhinsky
      • [stgt] sg-based backing store   FUJITA Tomonori
• [stgt] [PATCH] add get_unaligend_be24 and put_unaligend_be24   FUJITA Tomonori
  • [stgt] [PATCH] spc: update block descriptor in MODE SELECT   FUJITA Tomonori
• [stgt] [PATCH] ssc: use only one background thread   FUJITA Tomonori
• [stgt] [PATCH 00/15] ssc code updates   FUJITA Tomonori
  • [stgt] [PATCH 00/15] ssc code updates   Mark Harvey
    • [stgt] [PATCH 00/15] ssc code updates   Richard Sharpe
      • [stgt] [PATCH 00/15] ssc code updates   Mark Harvey
      • [stgt] [PATCH 00/15] ssc code updates   FUJITA Tomonori
    • [stgt] [PATCH 00/15] ssc code updates   FUJITA Tomonori
• [stgt] [PATCH 01/15] ssc: new backing store code   FUJITA Tomonori
• [stgt] [PATCH 02/15] move ssc tools to utils to usr   FUJITA Tomonori
• [stgt] [PATCH 03/15] ssc: set block length to zero   FUJITA Tomonori
• [stgt] [PATCH 04/15] ssc: remove blk_sz in ssc_read_block_limit   FUJITA Tomonori
  • [stgt] [PATCH 05/15] ssc: remove blk_sz in struct ssc_info   FUJITA Tomonori
    • [stgt] [PATCH 06/15] ssc: add MODE SELECT support   FUJITA Tomonori
      • [stgt] [PATCH 07/15] ssc: replace be24_to_uint with get_unaligned_be24   FUJITA Tomonori
• [stgt] [PATCH 08/15] ssc: remove obsolete comments   FUJITA Tomonori
  • [stgt] [PATCH 09/15] ssc: set the FILEMARK bit in sense in fixed read   FUJITA Tomonori
    • [stgt] [PATCH 10/15] ssc: fix logical postion in fixed read   FUJITA Tomonori
      • [stgt] [PATCH 11/15] ssc: resp_fixed_read and resp_var_read returns SAM result   FUJITA Tomonori
      • [stgt] [PATCH 12/15] ssc: add variable-length block read support   FUJITA Tomonori
      • [stgt] [PATCH 12/15] ssc: add variable-length block read support   Mark Harvey
• [stgt] [PATCH 13/15] ssc: add variable-length block write support   FUJITA Tomonori
  • [stgt] [PATCH 14/15] ssc: fix SPACE count field calculation   FUJITA Tomonori
    • [stgt] [PATCH 15/15] ssc: fix SPACE filemark   FUJITA Tomonori
• [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
  • [stgt] [PATCH] sg-based backing store   Doron Shoham
    • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
      • [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
  • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
    • [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
      • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
      • [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
      • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
      • [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
      • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
      • [stgt] [PATCH] sg-based backing store   Alexander Nezhinsky
      • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
      • [stgt] [PATCH] sg-based backing store   ronnie sahlberg
      • [stgt] [PATCH] sg-based backing store   Richard Sharpe
      • [stgt] [PATCH] sg-based backing store   Mark Harvey
      • [stgt] [PATCH] sg-based backing store   ronnie sahlberg
  • [stgt] [PATCH] sg-based backing store   Eli Dorfman
    • [stgt] [PATCH] sg-based backing store   FUJITA Tomonori
• [stgt] using tgt-admin with different driver then default   Doron Shoham
  • [stgt] using tgt-admin with different driver then default   Tomasz Chmielewski
    • [stgt] using tgt-admin with different driver then default   FUJITA Tomonori
      • [stgt] [PATCH] add --driver option to use different lld then iscsi.   Doron Shoham
      • [stgt] [PATCH] add --driver option to use different lld then iscsi.   Tomasz Chmielewski
      • [stgt] [PATCH] add --driver option to use different lld then iscsi.   Doron Shoham
      • [stgt] [PATCH] add --driver option to use different lld then iscsi.   FUJITA Tomonori
      • [stgt] [PATCH] add --driver option to use different lld then iscsi.   Tomasz Chmielewski
• [stgt] [PATCH 0/2] tgt-admin: check if device is in use before allocating it   Tomasz Chmielewski
  • [stgt] [PATCH 0/2] tgt-admin: check if device is in use before allocating it   FUJITA Tomonori
    • [stgt] [PATCH 0/2] tgt-admin: check if device is in use before allocating it   Doron Shoham
      • [stgt] [PATCH 0/2] tgt-admin: check if device is in use before allocating it   FUJITA Tomonori
  • [stgt] [PATCH 0/2] tgt-admin: check if device is in use before allocating it   FUJITA Tomonori
• [stgt] [PATCH 1/2] tgt-admin: user/system check if the device is in use   Tomasz Chmielewski
• [stgt] [PATCH 2/2] tgt-admin: document "allow-in-use" option   Tomasz Chmielewski
• [stgt] tgtd stuck when trying to delete a target   Doron Shoham
  • [stgt] tgtd stuck when trying to delete a target   FUJITA Tomonori
    • [stgt] tgtd stuck when trying to delete a target   Doron Shoham
      • [stgt] tgtd stuck when trying to delete a target   FUJITA Tomonori
• [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
  • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
    • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Doron Shoham
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Mark Harvey
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Mark Harvey
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   Eli Dorfman
      • [stgt] [PATCH] check for valid parameters when passing tgtadm commands   FUJITA Tomonori
• [stgt] [PATCH 0/8] ssc: the on-disk metadata format changes   FUJITA Tomonori
  • [stgt] [PATCH 1/8] move libcrc32c to the common place   FUJITA Tomonori
• [stgt] [PATCH 2/8] ssc: fix the alignement and size of struct MAM   FUJITA Tomonori
  • [stgt] [PATCH 3/8] ssc: make the on-disk MAM structure big endian   FUJITA Tomonori
• [stgt] [PATCH 4/8] ssc: add helpers for accessing to the on-disk blk_header structure   FUJITA Tomonori
  • [stgt] [PATCH 5/8] ssc: make the on-disk blk_header strcutre big endian   FUJITA Tomonori
• [stgt] [PATCH 6/8] ssc: kill compile warnings   FUJITA Tomonori
  • [stgt] [PATCH 7/8] ssc: add crc support   FUJITA Tomonori
• [stgt] [PATCH 8/8] ssc: bs_tape_ are renamed to bs_ssc_   FUJITA Tomonori
• [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   Tomasz Chmielewski
  • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   Tomasz Chmielewski
    • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   FUJITA Tomonori
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   Tomasz Chmielewski
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   FUJITA Tomonori
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   Tomasz Chmielewski
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   FUJITA Tomonori
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   Tomasz Chmielewski
      • [stgt] [PATCH 1/2] tgt-admin: allow to change tuning parameters (MaxRecvDataSegmentLength...)   FUJITA Tomonori
• [stgt] [PATCH 2/2] tgt-admin: document tuning parameters in targets.conf.example   Tomasz Chmielewski
• [stgt] [PATCH] check for duplicate target name   Doron Shoham
  • [stgt] [PATCH] check for duplicate target name   FUJITA Tomonori
• [stgt] setting write cache fails in recent git   Tomasz Chmielewski
  • [stgt] setting write cache fails in recent git   FUJITA Tomonori
    • [stgt] setting write cache fails in recent git   Tomasz Chmielewski
      • [stgt] setting write cache fails in recent git   FUJITA Tomonori
      • [stgt] setting write cache fails in recent git   Doron Shoham
      • [stgt] setting write cache fails in recent git   Tomasz Chmielewski
      • [stgt] setting write cache fails in recent git   Tomasz Chmielewski
      • [stgt] setting write cache fails in recent git   Doron Shoham
      • [stgt] setting write cache fails in recent git   Tomasz Chmielewski
      • [stgt] setting write cache fails in recent git   FUJITA Tomonori
      • [stgt] setting write cache fails in recent git   ronnie sahlberg
      • [stgt] setting write cache fails in recent git   Doron Shoham
      • [stgt] setting write cache fails in recent git   FUJITA Tomonori
      • [stgt] setting write cache fails in recent git   Doron Shoham
      • [stgt] setting write cache fails in recent git   FUJITA Tomonori
• [stgt] [PATCH] show backing store type   Doron Shoham
  • [stgt] [PATCH] show backing store type   FUJITA Tomonori
    • [stgt] [PATCH] show backing store type   Doron Shoham
      • [stgt] [PATCH] show backing store type   Doron Shoham
      • [stgt] [PATCH] show backing store type   FUJITA Tomonori
• [stgt] Limiting the number of ISCSI-Sessions per target   Dr. Volker Jaenisch
  • [stgt] Limiting the number of ISCSI-Sessions per target   Bastian Blank
  • [stgt] Limiting the number of ISCSI-Sessions per target   FUJITA Tomonori
    • [stgt] Limiting the number of ISCSI-Sessions per target   Arne Redlich
      • [stgt] Limiting the number of ISCSI-Sessions per target   FUJITA Tomonori
    • [stgt] Limiting the number of ISCSI-Sessions per target   volker.jaenisch at inqbus.de
      • [stgt] Limiting the number of ISCSI-Sessions per target   FUJITA Tomonori
      • [stgt] Limiting the number of ISCSI-Sessions per target   Martin Klapproth
      • [stgt] Limiting the number of ISCSI-Sessions per target   FUJITA Tomonori
      • [stgt] Limiting the number of ISCSI-Sessions per target   FUJITA Tomonori
• [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
  • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
    • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   Mike Christie
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   ronnie sahlberg
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   ronnie sahlberg
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
  • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
    • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
    • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
    • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
      • [stgt] [RFC] example init.d script for tgtd   Tomasz Chmielewski
      • [stgt] [RFC] example init.d script for tgtd   FUJITA Tomonori
• [stgt] 0.9.1 release plan   FUJITA Tomonori
• [stgt] segfault when stopping the target   Tomasz Chmielewski
  • [stgt] segfault when stopping the target   FUJITA Tomonori
    • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
      • [stgt] segfault when stopping the target   Tomasz Chmielewski
      • [stgt] segfault when stopping the target   FUJITA Tomonori
• [stgt] [PATCH] tgtadm: remove hack to set default lld to iscsi   FUJITA Tomonori
• [stgt] [PATCH] create ipc socket before calling daemon   FUJITA Tomonori
  • [stgt] [PATCH] tgtadm: restore the device-type option when creating a new logical unit   FUJITA Tomonori
    • [stgt] [PATCH] tgtadm: handle a partial response properly   FUJITA Tomonori
• [stgt] [PATCH] add some error messages in the ipc failure path   FUJITA Tomonori
• [stgt] [PATCH] fix tid testing   Doron Shoham
  • [stgt] [PATCH] fix tid testing   FUJITA Tomonori
    • [stgt] [PATCH] fix tid testing   Doron Shoham
      • [stgt] [PATCH] fix tid testing   FUJITA Tomonori
• [stgt] 0.9.1 released   FUJITA Tomonori
• [stgt] [patch] v1 - Remove a misleading error message.   Mark Harvey
  • [stgt] [patch] v1 - Remove a misleading error message.   FUJITA Tomonori
• [stgt] [patch] v2 - Remove a misleading error message.   Mark Harvey
• [stgt] make initiators "rescan" the device?   Tomasz Chmielewski
  • [stgt] make initiators "rescan" the device?   FUJITA Tomonori
    • [stgt] make initiators "rescan" the device?   Tomasz Chmielewski
      • [stgt] make initiators "rescan" the device?   FUJITA Tomonori
    • [stgt] make initiators "rescan" the device?   ronnie sahlberg
      • [stgt] make initiators "rescan" the device?   FUJITA Tomonori

Last message date: Fri Oct 31 05:20:44 CET 2008
Archived on: Fri Oct 23 19:46:10 CEST 2009

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...